Hi SER users
                     I am trying to test SER+FreeRadius (for accounting) and iam getting the follwing errors in log messages

ERROR MESSAGES:-(

localhost /usr/local/sbin/ser[3503]: Maxfwd module- initializing
localhost ser[3503]: ERROR: acc: can't get code for the Sip-Translated-Request-URI attribute
localhost ser[3503]: init_mod(): Error while initializing module acc

even then i changed the Attribute i am getting the same error please help regard this issue

my SER.cfg looks like this

loadmodule "/usr/local/lib/ser/modules/acc.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

                    # -- acc params --

# set the reporting log level
modparam("acc", "log_level", 1)
# number of flag, which will be used for accounting; if a message is
# labeled with this flag, its completion status will be reported
modparam("acc", "radius_flag", 1 )
modparam("acc", "radius_missed_flag", 2)
modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "service_type", 15)
# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        break;
    };
    if (msg:len >= 2048 ) {
        sl_send_reply("513", "Message too big");
        break;
    };


    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER") record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
        # mark routing logic in request
        append_hf("P-hint: rr-enforced\r\n");
        route(1);
        break;
    };

    if (!uri==myself) {
        # mark routing logic in request
        append_hf("P-hint: outbound\r\n");
        route(1);
        break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

        if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
            if (!www_authorize("81.21.34.37", "subscriber")) {
                www_challenge("81.21.34.37", "0");
                break;
            };

            save("location");
            break;
        };

        lookup("aliases");
        if (!uri==myself) {
            append_hf("P-hint: outbound alias\r\n");
            route(1);
            break;
        };

        # native SIP destinations are handled using our USRLOC DB
        if (!lookup("location")) {
            sl_send_reply("404", "Not Found");
            break;
        };
    };
    append_hf("P-hint: usrloc applied\r\n");
    route(1);
}

route[1]
{
    # send it out now; use stateful forwarding as it works reliably
    # even for UDP2TCP
    if (!t_relay()) {
        sl_reply_error();
    };
}