[Serusers] ERROR: acc_rad_request: radius-ing failed

Hi please someone help me... IŽm still having problems to obtain radius accounting and I found this error in the debug file: . . 7(7511) ERROR: acc_rad_request: radius-ing failed 7(7511) DEBUG: cleanup_uacs: RETR/FR timers reset 7(7511) DEBUG: add_to_tail_of_timer[2]: 0x402f59b8 7(7511) receive_msg: cleaning up 5(7509) ERROR: acc_rad_request: radius-ing failed 5(7509) SER: forwarding ACK statelessly 5(7509) DEBUG: mk_proxy: doing DNS lookup... 5(7509) check_via_address(200.110.6.58, 200.110.6.58, 0) 5(7509) Sending: ACK sip:6603000@10.0.0.236 SIP/2.0 Record-Route: <sip:6603000@200.110.2.132;ftag=4040fe43a4;lr=on> Via: SIP/2.0/UDP 200.110.2.132;branch=0 Via: SIP/2.0/UDP 200.110.6.58:5060;branch=z9hG4bK4040fe43a418 From: <sip:6604000@200.110.2.132>;tag=4040fe43a4 To: <sip:6603000@200.110.2.132>;tag=8e006a06a4 Call-ID: 40d9ba40-16dd-fe9c-8043-0002a4005564(a)200.110.6.58 CSeq: 18 ACK Route: <sip:6603000@200.110.2.132;ftag=4040fe43a4;lr=on> Content-Length: 0 Max-Forwards: 69 . . this error appears only when I try "setflag(1)" for the transactions I want to account, also in this case the ACK message it comes too late (not when pick Up the phone...). these are some details of my installation: - SuSE Linux 9.0 (i586) - ser-0.8.12 - I have followed "radius-how-to" very carefully. - radiusclient-0.3.2 - freeradius-0.9.3 (installed in the same host with ser) - I`m Not using mysql (do I have to use it??) - my current ser.cfg and endpoints configuration are shown below thanks. Rafael Risco PS: Config Files: # # ----------- global configuration parameters ------------------------ # debug=3 # debug level (cmd line: -dddddddddd) # fork=yes # log_stderror=no # (cmd line: -E) #/* Uncomment these lines to enter debugging mode debug=6 fork=yes log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # loadmodule "/usr/local/lib/ser/modules/uri.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" # loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # load the NAT Helper Module # loadmodule "/usr/local/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- # modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line # modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # modparam("acc","log_level",1) modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing # if (loose_route()) { # t_relay(); # break; # }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); break; }; } ######################################################################## Example of one endpoint config: VoiceFinder Gateway Series (http://www.addpac.com) AP200B System software Revision 8.10 ! ! VoIP configuration. ! ! ! Voice service voip configuration. ! voice service voip fax protocol t38 redundancy 0 fax rate 9600 h323 call start fast no force-starth245 busyout monitor gatekeeper busyout monitor voip-interface display send e164 ! ! ! Voice port configuration. ! voice-port 0/0 ! FXS caller-id enable ! ! voice-port 0/1 ! FXS caller-id enable ! ! ! ! ! Pots peer configuration. ! dial-peer voice 0 pots destination-pattern 6600020 port 0/0 call-waiting ! dial-peer voice 1 pots destination-pattern 6603000 port 0/1 call-waiting ! ! ! ! Voip peer configuration. ! ! dial-peer voice 1002 voip destination-pattern 6604000 session target sip-server session protocol sip codec g7231r63 dtmf-relay rtp-2833 ! ! ! ! SIP UA configuration. ! sip-ua user-register sip-username 660300X sip-password 1234 sip-server 200.X.2.132 register e164 ! ! ! MGCP configuration. ! mgcp codec g711ulaw ! ! ! Tones ! ! voip-interface ether0.0 ! agent00 #