Another thing. When I set the following parameters (to disable HEP and listen on raw socket)

modparam("sipcapture", "db_url", "mysql://homer:secret123@localhost/homer")
modparam("sipcapture", "capture_on", 1)
modparam("sipcapture", "capture_node", "homer01")
modparam("sipcapture", "raw_moni_capture_on", 1)
modparam("sipcapture", "raw_sock_children", 4)
modparam("sipcapture", "raw_socket_listen", "127.0.0.1:9060")
modparam("sipcapture", "promiscious_on", 1)

modparam("siptrace", "db_url", DBURL)
modparam("siptrace", "traced_user_avp", "$avp(s:traced_user)")
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_flag", FLD_TRACE)
modparam("siptrace", "duplicate_uri","sip:127.0.0.1:9060")
modparam("siptrace", "hep_mode_on",0)
modparam("siptrace", "trace_to_database", 0)

I get the following error:
ERROR: sipcapture [sipcapture.c:642]: ERROR: sipcapture:hep_msg_received HEP is not enabled

Thanks
Reda



On Sun, May 6, 2012 at 4:56 PM, Reda Aouad <reda.aouad@gmail.com> wrote:
Hi Alex,

Thank you for the fix. Just upgraded to Kamailio 3.3 and now Kamailio starts without the previous error. Can this be backported to version 3.2?

Bu the problem is still not solved. Although Kamailio starts, I get now a runtime error.
ERROR: sipcapture [sipcapture.c:675]: ERROR: sipcapture:hep_msg_received:  unsupported family [71]

This is my config running NODE and AGENT on same server:

--------------------------------
listen=udp:127.0.0.1:9060

modparam("sipcapture", "db_url", "mysql://homer:homer@localhost/homer")
modparam("sipcapture", "capture_on", 1)
modparam("sipcapture", "capture_node", "homer01")
modparam("sipcapture", "hep_capture_on", 1)

modparam("siptrace", "traced_user_avp", "$avp(s:traced_user)")
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_flag", FLD_TRACE)
modparam("siptrace", "duplicate_uri", "sip:127.0.0.1:9060")
modparam("siptrace", "hep_mode_on", 1)
modparam("siptrace", "trace_to_database", 0)

request_route {
    ...
    setflag(FLD_TRACE);
    sip_capture();
    ...
}
--------------------------------

It seems sipcapture is listening on both eth0 and loopback interfaces, and when it detects packets not encapsulated using HEP on eth0 (requests from SIP clients), it gives the error above.

Is there a way to tell sipcapture to bind only on one interface using HEP mode? It seems impossible for now to run NODE and AGENT on the same server using HEP mode...

Thanks for helping.
Reda



On Mon, Apr 16, 2012 at 12:00 AM, Alexandr Dubovikov <voip@start4.info> wrote:
Hi Reda,

please take the last git and check it again.

Wbr,
Alexandr


4/15/2012 8:53 PM, Reda Aouad wrote:
Hi,

I'm trying to setup Kamailio as a Homer capture server itself.
Kamailio listens on 2 ports : 53 for SIP users, and 9060 for homer SIP capture.
siptrace module duplicates packets to sipcapture module on port 9060.

I'm getting the following error :
ERROR: siptrace [siptrace.c:1669]: invalid port number; must be in [1024,65536]

This is my conf
-----------------------

listen=udp:127.0.0.1:9060

#!ifdef WITH_SIPTRACE
modparam("siptrace", "traced_user_avp", "$avp(s:traced_user)")
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_flag", FLD_TRACE)
modparam("siptrace", "duplicate_uri","sip:127.0.0.1:9060")
modparam("siptrace", "hep_mode_on",1);
modparam("siptrace", "trace_to_database", 0);
#!endif


Any help?

Thanks
Reda



_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users