Hola Victor Can you send the trace ? ngrep at SER or debug ccsip messages at Cisco, and show sip-ua status.
----- Original Message ----- From: "Victor Huertas Garcia" vhuertas@hotmail.com To: serusers@lists.iptel.org Sent: Thursday, July 07, 2005 8:05 AM Subject: [Serusers] URGENT! AS5350 <-> SER incompatibility problem
| | | Hi everybody! | | | recently I have been testing calls to/from ISDN with a AS5350. My SER | version is 0.8.14 and when I make a call from ISDN towards a SIP UA | registered in the SER the problem is that the AS5350 is no aware of Call | Release. | | I explain it in more detail... | | 1. AS5350 sends an INVITE to the SER with destination number 93222222 | 2. SER forwards the INVITE to the corresponding SIP UA. | 3. UA reponds with a 180 Ringing and it is forwarded to the AS5350 by the | SER | 4. When I pick up the phone, the SIP UA sends a 200 OK message, which is | frowarded by the SER as well. | 5. AS5350 replies with a ACK to the 200 OK but beware!! the AS5350 has | changed UDP source port!! it is different from the one set in INVITE. | 6. The SIP UA hangs up the call by sending a BYE message to the SER (it is | Record Routing) | 7. The SER forwards the BYE to the AS5350 but with the old UDP port!! | 8. AS5350 sends ICMP Destination Unreachable (Cause code: port unreachable) | every time that the SER retries the BYE. | | | My guess is that the AS5350 expects the BYE packet through the new UDP | port... | | Has anybody found such a problem? | | Thanks | | Victor | | | _______________________________________________ | Serusers mailing list | serusers@lists.iptel.org | http://lists.iptel.org/mailman/listinfo/serusers