5 Jul
2006
5 Jul
'06
9:55 a.m.
You probably haven't set the accounting flag in your loose_route
handling. Do a test pretty early in your ser.cfg main route (before
if(loose_route()) and set the appropriate flags.
g-)
ravi reddy wrote:
Thanks For your Response Mr. *Greger V. Teigre
I did* it ,by checking the dictionaries by seeing
your messages in 2004 archives ,
but here i got a problem is that if i set "radius flag" in ser.cfg
near call invite then i am only getting AccStartTime but not
AccStop Time
If i set flags near (cancel or Bye) iam getting only account stop
time and the acct start time is not showing ,
if i set two places even then iam getting only one time
*+----------------------+---------------------+---------------------+--------------------------+--------------------------+
| username | acctstarttime | acctstoptime |
callingstationid | calledstationid |
+----------------------+---------------------+---------------------+--------------------------+--------------------------+
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:45:50 | 2006-07-04 18:45:50 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:36:29 | 2006-07-04 18:36:29 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:17:35 | 2006-07-04 18:17:35 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
| 32331001(a)81.21.34.37 <mailto:32331001@81.21.34.37> | 2006-07-04
18:32:50 | 2006-07-04 18:32:50 | sip:32331001@81.21.34.37
<mailto:sip:32331001@81.21.34.37> | sip:22223333@81.21.34.37
<mailto:sip:22223333@81.21.34.37> |
+----------------------+---------------------+---------------------+--------------------------+--------------------------+
so how i can get out of this trouble please help me ;
Thank you
regards
Ravi.
*
On 7/4/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com>> wrote:
I suggest you figure out your dictionary first (ref. your other
post). Without the attributes in place, you get nowhere.
Remember that there are several elements to radius functionality
in SER:
- standalone radius server
- dictionary file for radius server
- SER radius modules compiled and linked against radiusclient-ng
(library)
- the radiusclient.conf file defining the setup for the radius
client (used by SER radius modules)
- dictionary file for radiusclient-ng
The attributes used are defined in SER modules. All attributes
must be found in the radiusclient.conf file (so that the
radiusclient can understand the attributes defined in the modules).
Then the radiusserver needs to understand all the attributes
(using it's own dictionary).
It looks like this:
ser.cfg radiusauth or setflag (acc_flag) => calls radius module =>
linked against radiusclient-ng.so => reads radiusclient.conf and
dictionary => sends requests on udp 1812 and 1813 => radius server
listens on ports and handles request responding back to
radiusclent, which returns data (or just ok) to the module
g-)
ravi reddy wrote:
Mr. Greger V.Teigre
Thanks for your response , when i tried changing line as
radius_log_flag the SER is showing there is no module like
Radius_log_flag in acc module but when i keep like radius_flag
its showing o.k
but here my doubt is are the accounting messages will log in to
radius???
my config file is accepting the radius_missed_flag...
is this setting will log the messages in radacct????
Are you using FreeRadius for accounting ???
waiting for your reply
Regards
Ravi.
On 7/4/06, *Greger V. Teigre* <greger(a)teigre.com
<mailto:greger@teigre.com> > wrote:
"To enable RADIUS accounting simply use radius_log_flag and
radius_log_missed_flag parameters instead of log_flag and
log_missed_flag. Mark transactions that should be logged with
flags configured in the parameters."
This means that you use modparam to set the flag values for
these two and then use setflag(yourflag) where you want
radius accounting to happen.
g-)
ravi reddy wrote:
Hi SER Users ,
I tried to install SER with basic
configurations and also with onsip config file with these SER
is working pretty good ,Now i want to test accounting on
radius server i installed Radius server with sql module and
it is listening on 1813 for accounting , i am using
radiusclient-ng-0.5.2 and i append dictionary.ser to main
dictionary file. every thing is o.k
Now , how can I get the accounting
details in radius server is there any specific configuration
to do that ?
in ser.cfg i make some changes as shown in SER_RADIUS HOW
TO's but i dont understand the way to move ........... :-(
so any body can please tell me an out line scenario how to
send account packets to radius server so that i will work on
that ;
Thanks in Advance
Regards'
Ravi.
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org>
http://lists.iptel.org/mailman/listinfo/serusers