24 Jun
2021
24 Jun
'21
9:25 a.m.
Hi Daniel,
Sure, please check as per your availability.
I had tried the above option before adding ds_default socket in kamailio
.cfg but the result was same. Now also I have tried, but still kamailio is
declaring 8080 as received port .
Following is the dispatcher configuration I have tried now.
root@localhost ~]# kamcmd dispatcher.list
{
NRSETS: 1
RECORDS: {
SET: {
ID: 1
TARGETS: {
DEST: {
URI: sip:172.27.44.125:5060
;transport=tcp
FLAGS: AP
PRIORITY: 0
ATTRS: {
BODY:
duid=sample-cas;maxload=1000;socket=tcp:172.27.45.219:5060
DUID: sample-cas
MAXLOAD: 1000
WEIGHT: 0
RWEIGHT: 0
SOCKET: tcp:
172.27.45.219:5060
}
LATENCY: {
AVG: 3.750000
STD: 1.500000
EST: 3.750000
MAX: 6
TIMEOUT: 0
}
RUNTIME: {
DLGLOAD: 0
}
}
}
}
}
}
Jun 24 21:29:57 localhost /usr/sbin/kamailio[5169]: WARNING: {2 10 OPTIONS
0f80e2d95e09aca5-5158(a)172.27.45.198} <script>: SIP response received on
8080 protocol:tcp RIP:172.27.45.219 SIP:172.27.44.125 method:OPTIONS
cid:0f80e2d95e09aca5-5158@172.27.45.198 replystatus:200 len:416
On Thu, Jun 24, 2021 at 6:25 PM Daniel-Constantin Mierla <miconda(a)gmail.com>
wrote:
Hello,
I will check the logs once I finish a few other tasks.
Meanwhile, maybe you can try to set the socket per destination to see if
it makes any difference, like
1 sip:172.27.44.125:5060;transport=tcp 0 0
duid=sample-cas;maxload=1000;*socket=tcp:172.27.45.219:5060
<http://172.27.45.219:5060>*
Cheers,
Daniel
On 24.06.21 12:48, Shahid Hussain wrote:
Hi Daniel,
Please find the debug logs attached. You can refer OPTION message of
timestamp 18:43:35 though there are multiple request.
There is a line in log says tcp worker on 8080 though I have not specified
in kamailio.cfg.
Jun 24 18:43:35 localhost kamailio: 44(11820) DEBUG: <core>
[core/tcp_main.c:4517]: handle_tcpconn_ev(): sending to child, events 1
Jun 24 18:43:35 localhost kamailio: 44(11820) DEBUG: <core>
[core/tcp_main.c:4190]: send2child(): selected tcp worker idx:6 proc:42
pid:11818 for activity on [tcp:172.27.45.219:8080], 0x7fca749c2d60
Attached kamailio.cfg also.
On Thu, Jun 24, 2021 at 3:31 PM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
can you set debug=3 in kamailio.cfg and then reproduce the case and send
here all the syslog message printed by kamailio?
Cheers,
Daniel
On 24.06.21 11:37, Shahid Hussain wrote:
Hi Daniel,
Attaching the filtered pcap with response for an OPTION message.
I am also attaching the all pcap with no filter having all SIP messages
being communicated, there is no data coming on port 8080.
Regards,
Shahid
On Thu, Jun 24, 2021 at 1:21 PM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Hello,
the pcap shows only the OPTIONS requests, not the replies. Maybe you
have to capture the traffic also on 8080 to catch it. It would important to
see the reply and where it is sent back to kamailio.
Cheers,
Daniel
On 24.06.21 09:24, Shahid Hussain wrote:
Hi,
I have configured the dispatcher default socket as below IP , the
expectation here is that kamailio should send all traffic from this IP
(port will be ephemeral) over TCP.
modparam("dispatcher", "ds_default_socket",
"tcp:172.27.45.219:5060")
This system also listens on port 8080 which is meant for websocket
communication (dispatcher communication is over non websocket).
Kamailio is sending an OPTION message to dispatcher IP over TCP on 5060
and getting 200 OK response but Kamailio considering the response is on
websocket port 8080 ,$Rp value is 8080.
onreply_route {
if (($Rp == 8080 ) && !(proto == WS))
{
xlog("L_WARN", "SIP response received on $Rp
protocol:proto RIP:$Ri SIP:$si method:$rm cid:$ci replystatus:$rs
len:$ml\n");
xlog("L_WARN", "SIP message received: $mb\n");
drop;
}
.....
....
}
Following is the output of above logs:
Jun 24 15:10:08 localhost /usr/sbin/kamailio[6223]: WARNING: {2 10
OPTIONS 1ab6573a4640823b-6209(a)172.27.45.198} <script>: SIP response
received on 8080 protocol:tcp RIP:172.27.45.219 SIP:172.27.44.125
method:OPTIONS cid:1ab6573a4640823b-6209@172.27.45.198 replystatus:200
len:416
Jun 24 15:10:08 localhost /usr/sbin/kamailio[6223]: WARNING: {2 10
OPTIONS 1ab6573a4640823b-6209(a)172.27.45.198} <script>: SIP message
received: SIP/2.0 200 OK#015#012Via: SIP/2.0/TCP
172.27.45.198:5060;branch=z9hG4bK4526.92b79f34000000000000000000000000.0;received=172.27.45.219#015#012From:
<sip:dispatcher@localhost>;tag=1ae6c95d92f9ea9ce927f715de5c48c8-eb141029#015#012To:
<sip:172.27.44.125:5060;transport=tcp>;tag=a9d542e0#015#012Call-ID:
1ab6573a4640823b-6209(a)172.27.45.198#015#012CSeq
<http://1ab6573a4640823b-6209@172.27.45.198#015%23012CSeq>: 10
OPTIONS#015#012Allow: INVITE, ACK, BYE, OPTIONS, CANCEL, INFO, UPDATE,
NOTIFY#015#012Content-Length: 0
Also I have attached a pcap.
Dispatcher.list configuration:
1 sip:172.27.44.125:5060;transport=tcp 0 0 duid=sample-cas;maxload=1000
Thanks,
Shahid
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
--