Hey,
Yes.
Dec 11 08:55:45 server77-68-57-68 /usr/local/sbin/kamailio[13233]: ERROR: <script>: r-uri (sip:XXXXX771269@202.68.XX.XX:5060) to me it looks ok
That is the printing when using the route (pstn) on the routing logic and only adding the xlog on the default route[PSTN]
With the full config (attached)
That is the trace just before entering the route (ISKRATEL)
Dec 11 09:25:39 /usr/local/sbin/kamailio[15793]: ERROR: <script>: Helena r-uri (sip:XXX771269@77.XX.XX.XX:7060;transport=tcp)
I was not able to get the other printings, and I’m not sure why… since I have the route [ISKRATEL] like:
route[ISKRATEL] {
xlog("L_ERR", "Helena 0 r-uri ($ru) \n");
#!ifdef WITH_PSTN
# check if ISKRATEL GW IP is defined
xlog("L_ERR", "Helena 1 r-uri ($ru) \n");
if (strempty($sel(cfg_get.iskratel.gw_ip))) {
xlog("SCRIPT: PSTN rotuing enabled but iskratel.gw_ip not defined\n");
return;
}
xlog("L_ERR", "Helena 2 r-uri ($ru) \n");
# only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}
xlog("L_ERR", "Helena 3 r-uri ($ru) \n");
if (strempty($sel(cfg_get.iskratel.gw_port))) {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip);
} else {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip) + ":"+ $sel(cfg_get.iskratel.gw_port);
xlog("L_ERR", "Helena 4 r-uri ($ru) \n");
}
xlog("L_ERR", "Helena 5 r-uri ($ru) \n");
#MORODO Add profix to ISKRATEL: A99901
subst_uri('/^sip:(.*)/sip:A99901\1/i'); # add A99901
#MORODO TEST
xlog("L_ERR", "Helena r-uri ($ru) \n");
route(RELAY);
exit;
#!endif
return;
}
I attach the kamailio conf file, in case you can see something on it. Can you advise me on why I’m not getting the xlogs inside the function? And where can be the problem with the 500 I’m terrible sorry?
Thanks in advanced!
Helena
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: miércoles, 11 de diciembre de 2013 8:39
To: Helena Garcia-Nieto; 'Kamailio (SER) - Users Mailing List'
Subject: Re: [SR-Users] 500 I'm terribly sorry error
I already told to pring the $ru, have you done it?
Daniel
On 10/12/13 17:09, Helena Garcia-Nieto wrote:
Hi Daniel,
Thanks for the answer but…
I already tested if the problem is there and even commenting the prefix out the error is exactly the same.
That is why I test it using:
pstn.gw_ip = "10.XX.XX.XX"
pstn.gw_port = "5060"
And route(PSTN)
Without changing original PSTN routing.
I’m getting the same problem.
Could you think on something else that can be affecting that?
Helena
From: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla
Sent: martes, 10 de diciembre de 2013 16:54
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] 500 I'm terribly sorry error
Hello,
I guess the r-uri is not correct after your changes. you can try to print $ru with xlog(...) just before the route(RELAY).
You should use string operation to add the prefix instead of using a regular expression substitution, like:
prefix("A99901");
or
$rU = "A99901" + $rU;
Cheers,
DanielOn 10/12/13 16:19, Helena Garcia-Nieto wrote:
Hello,
Thanks in advanced for the help. I am almost new with kamailio and still struggling through silly problems so please forgive me if the solution is so obvious.
I have a network like
Xlitle -- Kamailio -- GW
The GW is more or less out of my reach for changing the behaivour.
As devices I have xlitle
Kamailio is on version 4.0.2
I’ve changed only few things from the default config file. Add mysql support, auth, userlocdb, pstngw.
For this part, gw routing , I’ve defined gw ip and port inside the PSTN definition like:
#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
iskratel.gw_ip = "10.XX.XX.XX"
iskratel.gw_port = "5060"
#!endif
I route the calls with:
route(ISKRATEL);
And defined a routing function
route[ISKRATEL] {
#!ifdef WITH_PSTN
# check if ISKRATEL GW IP is defined
if (strempty($sel(cfg_get.iskratel.gw_ip))) {
xlog("SCRIPT: PSTN rotuing enabled but iskratel.gw_ip not defined\n");
return;
}
# only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}
if (strempty($sel(cfg_get.iskratel.gw_port))) {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip);
} else {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip) + ":"
+ $sel(cfg_get.iskratel.gw_port);
}
# Add profix to ISKRATEL: A99901
subst_uri('/^sip:(.*)/sip:A99901\1/i'); # add A99901
route(RELAY);
exit;
#!endif
return;
}
I can see that the code goes all the way to the route(relay) but all I can see is the 500 I’m terribly sorry, server error occurred (7/SL) and a second response 500 I’m terribly sorry, server error occurred (7/TM)
I’ve tried defining the IP as the given pstn.gw_ip and route(pstn) without changing anything on the pst default routing but the response of the server is the same.
I cannot see any special error on the logs.
I have the exact same config for this part, in another test server and the calls go to the gw without reporting any error.
I’ll appreciate any help from you! Thanks in advanced for your time
Helena
_______________________________________________SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda