23 Apr
2004
23 Apr
'04
9:38 a.m.
yes, you need a cvs client to download from cvs.
i'm sure cvs is included in your linux distribution, just install the
rpms and you will be fine (or use: apt-get install cvs if you are a
debian user).
btw: you also need developement tools installed on your PC (gcc ...)
klaus
Marty Chen wrote:
hi Klaus,
thx,
one more question regarding cvs, do i need to install some "cvs client" in
order to execute the following commands?
set CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser
export CVSROOT
cvs login
i tried to run the commands but nothing happened.
best regards,
---------------------------------------------
Neo-Online Corporation
Next Gen Networking Expert
Marty Chen
System Engineer
Tel: +886-2-7707-7988 ext 151
Cell: +886-960-516-560
Email: marty-chen(a)neo-ol.com
----- Original Message -----
From: Klaus Darilion
To: Marty Chen
Cc: Iptel\Serusers
Sent: Thursday, April 22, 2004 8:09 PM
Subject: Re: [Serusers] "nat_uac_test" - missing modules when starting SER?
Forget about the rpm release - the updated stable release (nat
enhancements, bugfixes, ...) is only in CVS.
IMPORTANT: uninstall all ser-related rpms before building from source
get it from cvs as explained on:
http://iptel.org/ser/cvs/
and then:
make all
make install
regards
klaus
Marty Chen wrote:
hi klaus,
first, thx for helping out.
i am running the "ser-0.8.12-0.i386.rpm" version of SER on redhat 9
released
by iptel.org
i am a newbie in linux.... so if u could instruct me on how to locate the
nathelper module then perhaps i can find out the more about the version in
detail.
best regards,
---------------------------------------------
Neo-Online Corporation
Next Gen Networking Expert
Marty Chen
System Engineer
Tel: +886-2-7707-7988 ext 151
Cell: +886-960-516-560
Email: marty-chen(a)neo-ol.com
----- Original Message -----
From: Klaus Darilion
To: Marty Chen
Cc: Iptel\Serusers
Sent: Thursday, April 22, 2004 6:10 PM
Subject: Re: [Serusers] "nat_uac_test" - missing modules when starting
SER?
which version of ser do you use? It's for sure in unstable and stable
from cvs.
klaus
Marty Chen wrote:
hi, when ever i startup SER with this function
used, "nat_uac_test", i get
the cfg loading error "is some module missing"
i know the function is in nathelper module, and it is loaded too.
can someone tell me what to do in order to use this function?
below is a sample code using nat_uac_test. thx in advance.
marty.
==============================================================
if (nat_uac_test("3")) {
# allow RR-ed requests, as these may indicate that
# a NAT-enabled proxy takes care of it; unless it is
# a REGISTER
if (method == "REGISTER" || ! search("?Record-Route:")) {
log("LOG: Someone trying to register from private IP,
rewriting\n");
# This will work only for user agents that
support symmetric
# communication. We tested quite many of them and majority is
# smart smart enough to be symmetric. In some phones, like
# it takes a configuration option. With Cisco 7960, it is
# called NAT_Enable=Yes, with kphone it is called
# "symmetric media" and "symmetric signaling". (The latter
# not part of public released yet.)
fix_nated_contact(); # Rewrite contact with source IP of
signalling
if (method == "INVITE") {
fix_nated_sdp("1"); # Add direction=active to SDP
};
force_rport(); # Add rport parameter to topmost Via
setflag(6); # Mark as NATed
};
};
best regards,
---------------------------------------------
Neo-Online Corporation
Next Gen Networking Expert
Marty Chen
System Engineer
Tel: +886-2-7707-7988 ext 151
Cell: +886-960-516-560
Email: marty-chen(a)neo-ol.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers