29 Jun
2018
29 Jun
'18
8:27 p.m.
you can check by starting your rtpengine with this parameter "--table=0".
If kernal modules is properly installed you will not face any error.
Best Regards,
Aqs Younas
On Fri, 29 Jun 2018 at 03:33, Mojtaba <mespio(a)gmail.com> wrote:
Thank you. I installed RTPEngine from git
(https://github.com/sipwise/rtpengine).
Let me know how can i be sure kernel module is loaded? and how can i load
it?
Thanks
On Thu, Jun 28, 2018 at 6:20 PM, Richard Fuchs <rfuchs(a)sipwise.com> wrote:
Looks like you haven't set up the kernel
module properly. For the "proc"
method of recording to work, the kernel module must be loaded and in use.
Cheers
On 2018-06-28 05:47, Mojtaba wrote:
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi all,
I installed RTPEngine (Version: 6.4.0.0+0~mr6.4.0.0
git-master-4eb80da) in my VM machine (Debian GNU/Linux 8 (jessie), i
also installed kamailio 5.1.
In kamailio routes, i have:
route {
...
#rtpengine_manage("record-call")
rtpengine_manage();
start_recording();
...
}
Here is all other configuration files:
In /etc/default/ngcp-rtpengine-daemon file:
RUN_RTPENGINE=yes
CONFIG_FILE=/etc/rtpengine/rtpengine.conf
CONFIG_SECTION=rtpengine
PIDFILE=/var/run/ngcp-rtpengine-daemon.pid
MANAGE_IPTABLES=yes
TABLE=0
In /etc/default/ngcp-rtpengine-recording-daemon file:
RUN_RTPENGINE_RECORDING=yes
CONFIG_FILE=/etc/rtpengine/rtpengine-recording.conf
CONFIG_SECTION=rtpengine-recording
PIDFILE=/var/run/ngcp-rtpengine-recording-daemon.pid
MUST_NFS=no
NFS_HOST=192.168.1.1
NFS_REMOTE_PATH=/var/recordings
NFS_LOCAL_MOUNT=/var/lib/rtpengine-recording # must match output-dir if
used
NFS_OPTIONS=hard,intr,tcp
In /etc/rtpengine/rtpengine.conf file:
[rtpengine]
table = 0
interface = 192.168.122.200
listen-ng = 127.0.0.1:2223
recording-dir = /var/spool/rtpengine/
recording-method = proc
In
[rtpengine-recording]
table = 0
# output-storage = db (use default)
# output-format = mp3 (use default)
# output-mixed = 1
spool-dir = /var/spool/rtpengine/metadata
output-dir = /var/spool/rtpengine/recording
But the recording is not work, I have these issues in syslog:
[1530178531.860171] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command
'start recording' from 127.0.0.1:38654
[1530178531.860191] NOTICE:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Turning on call
recording.
[1530178531.860239] WARNING:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Call recording through
/proc interface requested, but kernel table not open
[1530178531.860262] ERR:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open
recording metadata file '(null)' for writing: Bad address
[1530178531.860269] ERR:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open
recording metadata file '(null)' for writing: Bad address
[1530178531.860275] ERR:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open
recording metadata file '(null)' for writing: Bad address
[1530178531.860281] ERR:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open
recording metadata file '(null)' for writing: Bad address
[1530178531.860287] ERR:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open
recording metadata file '(null)' for writing: Bad address
[1530178531.860292] ERR:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open
recording metadata file '(null)' for writing: Bad address
[1530178531.860303] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'start
recording' from 127.0.0.1:38654 (elapsed time 0.000112 sec)
[1530178531.969040] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command
'start recording' from 127.0.0.1:39374
[1530178531.969069] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'start
recording' from 127.0.0.1:39374 (elapsed time 0.000004 sec)
[1530178537.176906] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command
'delete' from 127.0.0.1:40258
[1530178537.177003] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Scheduling deletion of
call branch '9052b05a' (via-branch '') in 30 seconds
[1530178537.177026] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'delete'
from 127.0.0.1:40258 (elapsed time 0.000084 sec)
[1530178537.178368] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command
'start recording' from 127.0.0.1:40258
[1530178537.178392] INFO:
[MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'start
recording' from 127.0.0.1:40258 (elapsed time 0.000004 sec)
^C[1530178543.752740] INFO: Version 6.4.0.0+0~mr6.4.0.0
git-master-4eb80da shutting down
Also when i start RTPEngine, I have FATAL error about module
xt_RTPENGINEer in syslog:
Jun 28 05:44:58 debian8 systemd[1]: Starting NGCP RTP/media Proxy
Daemon...
Jun 28 05:44:58 debian8 ngcp-rtpengine-iptables-setup[10203]:
modprobe: FATAL: Module xt_RTPENGINE not found.
Jun 28 05:44:58 debian8 ngcp-rtpengine-iptables-setup[10203]:
iptables: No chain/target/match by that name.
Jun 28 05:44:58 debian8 ngcp-rtpengine-iptables-setup[10203]:
ip6tables: No chain/target/match by that name.
Jun 28 05:44:58 debian8 systemd[1]: Started NGCP RTP/media Proxy Daemon.
Jun 28 05:44:58 debian8 rtpengine[10219]: [1530179098.989322] INFO:
Generating new DTLS certificate
Jun 28 05:44:59 debian8 rtpengine[10219]: [1530179099.033499] ERR:
FAILED TO CREATE KERNEL TABLE 0 (No such file or directory), KERNEL
FORWARDING DISABLED
J
Let me know what is the problem and how can i solve it?
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users