hello
About this error in my SuSE box, I have installed Ser, Radiusclient and Freeradius in
other PC with Red Hat 9 and now radius accounting is working very well so I think there is
a problem with some module or library in SuSE Linux 9...
Now I have some questions about this accounting logs:
1. I have 3 states for each call: 2 starts and 1 stop, please see the log below and tell
me how can I solve this problem.
2. I need account non successful calls, i.e. 0 second calls, is this possible with this
module?
thanks
Rafael
----- Radius Log for 1 completed call ---------->
Fri Jul 23 18:04:45 2004
Acct-Status-Type = Start
Service-Type = IAPP-Register
Sip-Response-Code = 200
Sip-Method = Invite
User-Name = "6603000(a)200.110.2.131"
Calling-Station-Id = "sip:6603000@200.110.2.131"
Called-Station-Id = "sip:6604000@200.110.2.131"
Sip-Translated-Request-URI = "sip:6604000@200.110.6.58"
Acct-Session-Id = "f1367900-7340-4684-802a-0002a40055b2(a)10.0.0.236"
Sip-To-Tag = "bb405f25a4"
Sip-From-Tag = "f100462aa4"
Sip-CSeq = "15"
NAS-IP-Address = 127.0.0.1
NAS-Port = 5060
Acct-Delay-Time = 0
Client-IP-Address = 127.0.0.1
Acct-Unique-Session-Id = "71f539047855d0e4"
Timestamp = 1090623885
Fri Jul 23 18:04:45 2004
Acct-Status-Type = Start
Service-Type = IAPP-Register
Sip-Response-Code = 200
Sip-Method = Bye
User-Name = "6603000(a)200.110.2.131"
Calling-Station-Id = "sip:6603000@200.110.2.131"
Called-Station-Id = "sip:6604000@200.110.2.131"
Sip-Translated-Request-URI = "sip:6604000@200.110.6.58"
Acct-Session-Id = "f1367900-7340-4684-802a-0002a40055b2(a)10.0.0.236"
Sip-To-Tag = "bb405f25a4"
Sip-From-Tag = "f100462aa4"
Sip-CSeq = "15"
NAS-IP-Address = 127.0.0.1
NAS-Port = 5060
Acct-Delay-Time = 0
Client-IP-Address = 127.0.0.1
Acct-Unique-Session-Id = "71f539047855d0e4"
Timestamp = 1090623885
Fri Jul 23 18:05:06 2004
Acct-Status-Type = Stop
Service-Type = IAPP-Register
Sip-Response-Code = 200
Sip-Method = 8
User-Name = "6604000(a)200.110.2.131"
Calling-Station-Id = "sip:6604000@200.110.2.131"
Called-Station-Id = "sip:6603000@200.110.2.131"
Sip-Translated-Request-URI = "sip:6603000@10.0.0.236"
Acct-Session-Id = "f1367900-7340-4684-802a-0002a40055b2(a)10.0.0.236"
Sip-To-Tag = "f100462aa4"
Sip-From-Tag = "bb405f25a4"
Sip-CSeq = "9"
NAS-IP-Address = 127.0.0.1
NAS-Port = 5060
Acct-Delay-Time = 0
Client-IP-Address = 127.0.0.1
Acct-Unique-Session-Id = "8b35f17e9ba92270"
Timestamp = 1090623906
-------------------------
Jan Janak <jan(a)iptel.org> wrote:
On 21-07 11:07, Rafael J. Risco G.V. wrote:
Hi Jan
I did not see any other error in Ser or Radiusd Debuging, I?ve tested radiusclient with
"radclient" and I think its working as I can see in the logs below:
sipser:/usr/local/etc/raddb# radclient -f digest localhost auth hola123
Received response ID 138, code 2, length = 45
Reply-Message = "Hello, test with digest"
This tests just authentication, not accounting.
on the other hand, freeradius in debug mode just show
me authentication process from Ser and it is doing "accounting" for other NAS
like gnugk and cisco as5350 (please look the radius log below)... About "radius-ing
failed" message, I found this parameter in acc.c (line 674,2-16):
if (rc_acct(SIP_PORT, send)!=OK_RC) {
LOG(L_ERR, "ERROR: acc_rad_request: radius-ing failed\n");
goto error;
}
rc_avpair_free(send);
return 1;
Yes, but the error comes from the radiusclient library because rc_acct
does not return OK_RC, as you can see in the code snippet above.
I really do not know what the problem is, since it is working in other
setups, I suppose your radiusclient library is not configured
properly, maybe there is an error in the dictionary files. It is also
possible to enable debugging in radiusclient, but you need to
recompile the library to make it work.
Jan.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
---------------------------------
Do You Yahoo!?
Todo lo que quieres saber de Estados Unidos, América Latina y el resto del Mundo.
Visíta Yahoo! Noticias.