5 Mar
2022
5 Mar
'22
4:35 p.m.
Question :
If kamailio is behind a double NAT setup
Internet - (Model-router : NAT 1) - (router - NAT2) - kamailio
Could I use this settings ?
- For public softphone :
listen=udp: IPv4_private: 5060 advertise IPv4_public : 5060
Domain : IPv4_public:5060
- For private softphone on same vlan as kamailio
listen=udp: IPv4_private:5066
Domain : IPv4_private:5066
Best Regards,
Youssef BOUJRAF
Email: yboujraf(a)gmail.com
On Sat, Mar 5, 2022 at 1:23 AM Youssef Boujraf <yboujraf(a)gmail.com> wrote:
Dear,
Then;
- For public softphone :
listen=udp: IPv4_private: 5060 advertise IPv4_public : 5060
Domain : IPv4_public:5060
- For private softphone on same vlan as kamailio
listen=udp: IPv4_private:5066
Domain : IPv4_private:5066
Best Regards,
Youssef BOUJRAF
Email: yboujraf(a)gmail.com
On Fri, Mar 4, 2022 at 3:00 PM Youssef Boujraf <yboujraf(a)gmail.com> wrote:
Hi Dear
I am trying to understand how "listen" and "advertise" work for sip
signaling purpose ( corebooks : listen
<http://www.kamailio.org/wiki/cookbooks/5.4.x/core#listen> and advertise
)
Flow : kamailio behind NAT using softphones on private and public
networks.
- kamailio :
Network :
IPv4_private 192.168.1.6 / IPv4_public
kamailio.cfg :
listen=udp: IPv4_private: 5060 advertise IPv4_public : 5060
- uac (softphone) :
zoiper, microsip, cisco spa508g
USE CASE :
I 'd like to force all softphone on the same local network to reach
kamailio through a public ip address.
??? QUESTION : Do I need to REGISTER on IPv4_private address of Kamailio
OR REGISTER on IPv4_public address of kamailio or DEFINE another "listen"
with another PORT WITHOUT "advertise" for softphone on same kamailio
network ?
listen=udp: IPv4_private: 5060 advertise IPv4_public : 5060
listen=udp: IPv4_private: 5066
Do I need to use "kamctl ps" to verify which interface is listening on
port ?
Thanks in advance
Best Regards,
Youssef BOUJRAF
Email: yboujraf(a)gmail.com