[Serusers] Radius HowTo!!!

hello serusers! I have followed these instructions carefully (http://iptel.org/ser/doc/ser_radius/ser_radius.html) but now I have this error: ser:~/SER/ser-0.8.12 # /sbin/ser 0(31886) loading module //lib/ser/modules/sl.so 0(31886) loading module //lib/ser/modules/tm.so 0(31886) loading module //lib/ser/modules/rr.so 0(31886) loading module //lib/ser/modules/maxfwd.so 0(31886) loading module //lib/ser/modules/usrloc.so 0(31886) loading module //lib/ser/modules/registrar.so 0(31886) loading module //lib/ser/modules/group_radius.so 0(31886) loading module //lib/ser/modules/auth.so 0(31886) loading module //lib/ser/modules/auth_radius.so 0(31886) loading module //lib/ser/modules/acc.so 0(31886) set_mod_param_regex: rr matches module rr 0(31886) set_mod_param_regex: found <enable_full_lr> in module rr [//lib/ser/modules/rr.so] 0(31886) set_mod_param_regex: auth_radius matches module auth_radius 0(31886) set_mod_param_regex: found <radius_config> in module auth_radius [//lib/ser/modules/auth_radius.so] 0(31886) set_mod_param_regex: auth_radius matches module auth_radius 0(31886) set_mod_param_regex: found <service_type> in module auth_radius [//lib/ser/modules/auth_radius.so] 0(31886) set_mod_param_regex: acc matches module acc 0(31886) set_mod_param_regex: found <radius_config> in module acc [//lib/ser/modules/acc.so] 0(31886) set_mod_param_regex: acc matches module acc 0(31886) set_mod_param_regex: found <service_type> in module acc [//lib/ser/modules/acc.so] 0(31886) set_mod_param_regex: acc matches module acc 0(31886) set_mod_param_regex: found <radius_flag> in module acc [//lib/ser/modules/acc.so] 0(31886) set_mod_param_regex: acc matches module acc 0(31886) set_mod_param_regex: found <radius_missed_flag> in module acc [//lib/ser/modules/acc.so] 0(31886) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [//lib/ser/modules/maxfwd.so] 0(31886) find_export: found <sl_send_reply> in module sl_module [//lib/ser/modules/sl.so] 0(31886) find_export: found <sl_send_reply> in module sl_module [//lib/ser/modules/sl.so] 0(31886) find_export: found <record_route> in module rr [//lib/ser/modules/rr.so] 0(31886) find_export: found <loose_route> in module rr [//lib/ser/modules/rr.so] 0(31886) find_export: found <t_relay> in module tm [//lib/ser/modules/tm.so] 0(31886) find_export: <radius_www_authorize> not found 0(31886) find_export: <radius_www_authorize> not found 0(31886) parse error (115,55-56): unknown command, missing loadmodule? 0(31886) find_export: found <www_challenge> in module auth [//lib/ser/modules/auth.so] 0(31886) find_export: found <save> in module registrar [//lib/ser/modules/registrar.so] 0(31886) find_export: found <lookup> in module registrar [//lib/ser/modules/registrar.so] 0(31886) find_export: found <sl_send_reply> in module sl_module [//lib/ser/modules/sl.so] 0(31886) find_export: found <t_relay> in module tm [//lib/ser/modules/tm.so] 0(31886) find_export: found <sl_reply_error> in module sl_module [//lib/ser/modules/sl.so] ERROR: bad config file (1 errors) 0(31886) DEBUG: tm_shutdown : start 0(31886) DEBUG: tm_shutdown : empting hash table 0(31886) DEBUG: tm_shutdown: releasing timers 0(31886) DEBUG: tm_shutdown : removing semaphores 0(31886) DEBUG: tm_shutdown : done 0(31886) shm_mem_destroy 0(31886) destroying the shared memory lock SOME ADVICE PLEASE!!! Thanks Rafael ------------SER.CFG--------------------------------->>>>>>> ser:~/SER/ser-0.8.12 # more /etc/ser/ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "//lib/ser/modules/mysql.so" loadmodule "//lib/ser/modules/sl.so" loadmodule "//lib/ser/modules/tm.so" loadmodule "//lib/ser/modules/rr.so" loadmodule "//lib/ser/modules/maxfwd.so" loadmodule "//lib/ser/modules/usrloc.so" loadmodule "//lib/ser/modules/registrar.so" loadmodule "//lib/ser/modules/group_radius.so" #loadmodule "//lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "//lib/ser/modules/auth.so" #loadmodule "//lib/ser/modules/auth_db.so" loadmodule "//lib/ser/modules/auth_radius.so" loadmodule "//lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) modparam("acc", "radius_config","/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("iptel.org", "subscriber")) { www_challenge("iptel.org", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }