28 Jan
2010
28 Jan
'10
10:49 p.m.
Hi,
I have a special question regarding a mixture of parallel and serial
forking, operated by Kamailio-3.0.0.
First of all I will give you a short background information, what the
target will be:
I have a SIP-server on place A, 3 gateways on place B and 3 gateways
on place C). These gateways are registered on SIP server (A) with
different Q-values (e.g. GW-B1=1.0, GW-C1=1.0, GW-B2=0.8, GW-C2=0.8,
GW-B3=0.6, GW-C3=0.6). The target is, that a call for a gateway MUST
be signalled on place B and C in parallel (forking) until the call is
finally established over one of the two involved gateways on place B
or C. When the prime gateway(s) (with the highest Q-value) fail (e.g.
they do not send a provisional response within a timeout or send a
negative response), the next gateway(s) should be addressed (with the
next lower Q-value), a.s.o.
The configuration works well in case that both gateways on place B
and C fail at the same time (BOTH do not send a response or BOTH send
a negative response or one does not send a response and the other one
sends a negative response). However, in case that only ONE of the two
(always in parallel) addressed gateways fails, it does not work as
expected.
What is expected?
Do you want to trigger failover to lower priority even if one the
gateways is still working fine? You can not do that with sip-router.
sr implements parallel forking according to RFC3261, this means it
will not generate a failure response as long as one of the branches is
still active, maybe sending 200 ok.
Finally, a call can only be established via one
gateway, so either the
GW at B or C sends the 200 OK. If you always trigger failover to lower
priority gateways if one of the gateways failed, there is no benefit
of doing parallel forking at all - at least I do not see a benefit of
having redundant gateways.
regards
klaus
- the parallelism is necessary, because calls over these gateways are
addressed to a usergroup which is split to place B and C behind a
redundant "non-SIP" PBX system with two active halfs); you can not
suspect if a user on place B or a user on place C will take the call;
therefore the call has to be sent to both places.
However, the favored behaviour is not standard conform - I know. I guess
therefore I would need a B2BUA, which is able to establish two
independent (serially forked) preliminary connections to gateways on
place B and C and interconnects the successful call to the call
originator. I fear that no possibility will be available with Kamailio /
a standard SIP server.
The easiest way would be forking the incoming call to ALL available
gateways in parallel. Any gateway will accept the call. However, this is
not supported by the gateways and the system behind the gateways yet.
Does anybody have an alternative idea to parallel forking, how this
"requirement" could be solved?
regards, Klaus F.