Re: [Serusers] Authorization Problems with Radius.

Hi. I'm new in SER, but i have followed all the instructions to install the RADIUS interaction. Now i have obtaining the nex error in the console debug when a REGISTER message arrives to the SER. 7(21063) check_nonce(): comparing [4134bbc79ed1bc9d3f911cb33ff4c399d7cdea8c] and [4134bbc79ed1bc9d3f911cb33ff4c399d7cdea8c] 7(21063) radius_authorize_sterman(): Failure 7(21063) build_auth_hf(): 'WWW-Authenticate: Digest realm="XX.XX.XX.XX", nonce="4134bbc79ed1bc9d3f911cb33ff4c399d7cdea8c" ' 7(21063) parse_headers: flags=-1 7(21063) check_via_address(64.76.148.186, 64.76.148.186, 0) 7(21063) receive_msg: cleaning up Here is my ser.cfg # # $Id: ser.cfg,v 1.21.2.2 2003/10/13 22:53:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local//lib/ser/modules/mysql.so" loadmodule "/usr/local//lib/ser/modules/sl.so" loadmodule "/usr/local//lib/ser/modules/tm.so" loadmodule "/usr/local//lib/ser/modules/rr.so" loadmodule "/usr/local//lib/ser/modules/maxfwd.so" loadmodule "/usr/local//lib/ser/modules/usrloc.so" loadmodule "/usr/local//lib/ser/modules/registrar.so" loadmodule "/usr/local//lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # ----------------- setting module-specific parameters --------------- # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc","log_level",1) modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiuscl ient.conf") modparam("auth_radius","service_type",15) modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.con f") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) modparam("acc", "failed_transactions", 1) modparam("acc", "report_ack", 0) #group radius modparam("group_radius","radius_config","/usr/local/etc/radiusclient/radiusc lient.conf") modparam("group_radius", "use_domain", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (! radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } In my radiusclient.cfg i have configured for authentication localhost:1645. In my Radius Server (Radiator) i'm not see any Radius message. What is the problem? Hope someone can help me Thank in advance BEst Regards Ricardo Martinez. _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers