21 Jul
2020
21 Jul
'20
3:28 p.m.
Hi Aristedis,
Sorry, indeed you have module parameters.
When one asterisk is down what you see when you run:
kamcmd dispatcher.list
Jurijs
On Tue, Jul 21, 2020 at 3:19 PM Aristeidis Tsitras <tsitras(a)gmail.com>
wrote:
i know that there is something wrong, but i can not
figure it out.
Especially for the modparam settings that Mr Jurijs Ivolga is proposing, I
already had them. it is the kamailio.cfg that I originally attached.
Unfortunately I did not manage to find anything in the parameters that
will solve the problem as proposed by Villasmil and Semenov. I have given a
try on changes but nothing good came up.
Στις Τρί, 21 Ιουλ 2020 στις 2:48 μ.μ., ο/η Arsen Semenov <
arsperger(a)gmail.com> έγραψε:
Hi Aristeidis,
David is right, first would be good to check the status of the
destinations.
In your configuration there are couple of things to have in mind: need to
set correct flag param
https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.…
select the algorithm used to select the destination (ds_select_dst) and
have a faulure_route where the next destination will be tried in case first
is down.
You can find the examples in the module doc.
Cheers,
On Tue, Jul 21, 2020 at 4:11 PM Aristeidis Tsitras <tsitras(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
I have a Kamailio and 2 asterisk servers. All
users are created in both
of the asterisk servers. I am forwarding the registration to asterisk. The
problem is that it is always used on only one server from the list. Even if
one goes to shutdown, then there is not any registration sent to the
available server. Even if *some *of the extensions can be seen
registered in both of the asterisk's, if the secondary goes down, then
there are no services for the phones.
I am attaching the kamailio.cfg. My dispatch list is:
1 sip:192.168.0.100:5080 0 0 maxload=20
2 sip:192.168.0.101:5080 0 0 maxload=20
In both of the asterisk servers i am using sip.conf to create users and
s sip trunk for the Kamailio. Nothing special about it.
I am looking to find what is wrong with my config and i cannot
loadbalance/failover to the asterisk servers.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Arsen Semenov
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users