Re: [Kamailio-Users] Question about registrar lookup() and branching.

Perhaps I can put the issue more succinctly: Say I have a user that has two DIDs - the ones in my signature, 6789540670 and 6789540671. If I actually have a user (evariste1, say) register from two pieces of CPE with a contact of 6789540670@IP, then, yes, I agree, there should be two branches generated. The problem I have is with the scenario where endpoint A registers as evariste1@my_sip_domain with a contact of 6789540670 and endpoint B registers as evariste1@my_sip_domain with a contact of 6789540671. When the registrar/usrloc lookup() evariste1, they're going to get both contacts, and branch the call to both contacts -- regardless of which number is the one that was actually dialed from the PSTN. So, what I'm trying to do with my branch routes is have it look at the To URI user part ($tU) and compare it with the lookup()'d RURI user part. If they match up, send it on, otherwise drop() the branch. The problem, as I mentioned, is that there are far too many possible registration and end-user UA scenarios. What if they only want to register once/their equipment only allows one registration? What if they want to receive some DIDs on one "line" and some DIDs on another "line?" What if, in the former scenario, they want one registration but need to do DNIS-based routing, which in Asterisk is currently entirely broken? The problem is that if I register with a contact of 6789540670 without any checks, I'm going to get calls for 6789540671 as well (as indicated in To:) with a RURI user part of 6789540670 as well, because, well, that's what the contact is. Can't have that happen. -- Alex -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (706) 338-8599