Hello,
if your config it is based on the default one, the Route header for within dialog requests is marked by a parameter, nat=yes, that is used to decide whether to do rtpproxy or not.
So, if you have a custom config, check the default one for the nat traversal handling part.
Cheers, Daniel
On 8/30/12 12:39 AM, Spencer Thomason wrote:
Hello, I'm using Kamailio 3.2.4 for NAT traversal using rtpproxy_manage() in a largely stock script. Everything works great until the far end (on a public ip) sends a t.38 re-INVITE. The 200OK from the NATed UAC then doesn't trigger rtpproxy and the private IP in the sdp causes the fax to fail. Any help handling these re-INVITEs would be greatly appreciated. I'm happy to post traces if that helps describe the situation. The network topology looks like this:
NATed UAC -> Kamailio on a public IP -> UAS on a public IP
Thanks in advance, Spencer
/Connected by DROID on Verizon Wireless/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users