2 Aug
2005
2 Aug
'05
8:55 a.m.
Hi Ray,
try to place before the :
t_relay_to_udp("<public_ip1>", "5060");
the following:
force_send_socket( <public_ip0>:5060 );
this will force the eth0 interface to be used for forwarding the
requests to Astersik.
regards,
bogdan
Ray Van Dolson wrote:
I'm using nathelper with OpenSER 0.10.x.
Here's a quickie diagram of my
setup:
[SIP ATA] <-------------> [OpenSER] <--------------> [Asterisk]
10.0.201.5 eth1 - 10.0.201.7 eth0 - <public_ip1>
eth0 - <public_ip0>
I'm using the basic nathelper example configuration, except for one
modification. I removed the call to t_relay and replaced it with:
t_relay_to_udp("<public_ip1>", "5060");
Basically I want a SIP packet to come in to eth1 on OpenSER server, get
rewritten as needed by nathelper, then get sent out to public_ip1 on my
Asterisk PBX.
This appears to be working except a tcpdump on eth0 on OpenSER shows:
14:39:08.654908 IP 10.0.201.7.5060 > <public_ip1>.5060: UDP, length 629
Obviously the packets will never get back with that source IP address. What
command should I be looking at to rewrite this IP so it shows up as
<public_ip0> automatically?
I'm trying to get SIP ATA's to REGISTER on my Asterisk box but proxy through
OpenSER ... (and eventually make use of the rtp proxy).
Can post more info if requested, I am new to SER. :-)