14 Jan
2004
14 Jan
'04
4:44 a.m.
Probably if (uri==myself) condition doesn't match the hostname or IP
address in the Request-URI of the message. SER prints all IP addresses
and hostnames that will be matched by the condition when it starts. If
the hostname/IP address is not there, use listen and/or alias directive
to add it.
See also the archives of the mailing list, this has been discussed many
times.
Jan.
On 14-01 08:22, deen wrote:
Thanks Nils, I started with debug mode off. And the registration fails with
registration denied: (SIP/2.0 483 Too Many Hops)
Now I suspect the request is coming to the server but there is a routing
issue. Any idea why this could be.
Deen
----- Original Message -----
From: "Nils Ohlmeier" <nils(a)iptel.org>
To: "deen" <deen(a)slt.lk>lk>; <serusers(a)lists.iptel.org>rg>; "Jiri
Kuthan"
<jiri(a)iptel.org>
Sent: Tuesday, January 13, 2004 6:19 AM
Subject: Re: [Serusers] ser probs
When your SER listens only on 127.0.0.1, because you use debug mode, then no
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
On Wednesday 14 January 2004 02:32, deen wrote:
> Jiri,
>
> Thanks for the info.
>
> > >Also I cannot register from a SIP
> > >client I get an error.
> > >
> > >Proxy registration failed. Reason : general registration failure
(Client
> > >non-INVITE transaction [Trying]:
timed out.
> >
> > That's easy -- either the client didn't deliver the REGISTER to SER,
> > (misconfiguration?) or the reply was not delivered (for example
because
of NAT presence).
There is definitely no NAT here. I am pretty new to this - what could be
the likely misconfiguration. client (except clients running on the same host)
can reach the server.
Nils
> Thanks
>
> Deen
>
>
> ----- Original Message -----
> From: "Jiri Kuthan" <jiri(a)iptel.org>
> To: <deen(a)slt.lk>lk>; <serusers(a)lists.iptel.org>
> Sent: Monday, January 12, 2004 6:20 AM
> Subject: Re: [Serusers] ser probs
>
> > At 12:59 AM 1/13/2004, M.I.Deen wrote:
> > >Dear List,
> > >
> > >My serctl ps shows very less processes see below.
> > >
> > > /usr/sbin/serctl ps
> > >0 24442 stand-alone receiver @ 127.0.0.1:5060
> > >1 24444 timer
> > >2 24446 fifo server
> > >3 0
> > >4 0
> > >5 0
> > >6 0
> > >7 0
> > >
> > >
> > >I wonder whether this is typical.
> >
> > it is, if you started SER in debugging mode.
> >
> > >Also I cannot register from a SIP
> > >client I get an error.
> > >
> > >Proxy registration failed. Reason : general registration failure
(Client
> > >non-INVITE transaction [Trying]:
timed out.
> >
> > That's easy -- either the client didn't deliver the REGISTER to SER,
> > (misconfiguration?) or the reply was not delivered (for example
because
of NAT presence).
-jiri
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers