Re: [SR-Users] Need help in routing configuration

This is exactly what I am doing. I have this Asterisk/Kamailio as a host on an ESX server. The host has 2 interfaces, eth0 and eth1, see bellow, the interface config: root@qa-qsuitePBX-01:~# more /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.98.6.5 netmask 255.255.254.0 network 10.98.6.0 broadcast 10.98.7.255 gateway 10.98.6.1 # The secondary network interface auto eth1 iface eth1 inet static address 10.98.6.6 netmask 255.255.254.0 network 10.98.6.0 broadcast 10.98.7.255 gateway 10.98.6.1 up route add -net 10.98.118.0 netmask 255.255.255.0 gw 10.98.6.1 dev eth1 I do not see the invites going from 6.5 to 6.6 then 118.20 So trying to dummy this down to 1 interface and use different ports. But my problem is I don't know what and where to setup aech app (asterisk and Kamailio) to be on separate ports, and make sure the route in Kamailio is correct. Nelson Pereira -----Original Message----- From: Omar [mailto:omar@321communications.com] Sent: Thursday, May 20, 2010 9:25 AM To: Nelson Pereira Cc: Klaus Darilion; sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Need help in routing configuration many options here are some: use different ports 5061 to asterisk and the rest to Kamailio, or virtualize, there are many solutions for virtualization, including VMWARE, VirtualBox(Oracle-SUN), and Xen. or: use different Interfaces real or virtual with different IPs, and listed on the specific interface for each application. kamailio eth0 (ip x.x.x.x) asterisk eth0:1 (ip z.z.z.z) _______________ Omar