Re: [Serusers] ser/radius

From the attached logs I would say that the authentication in radius

0(13462) DEBUG: to body [<sip:1111@sip.net4india.com> ] 0(13462) get_hdr_field: cseq <CSeq>: <2> <REGISTER> 0(13462) DEBUG: get_hdr_body : content_length=0 0(13462) found end of header 0(13462) find_first_route(): No Route headers found 0(13462) loose_route(): There is no Route HF 0(13462) REGISTER: Authenticating user 0(13462) check_nonce(): comparing [3fb37a088e0d83f2084b0221f11e7ac8d6709be0] and [3fb37a088e0d83f2084b0221f11e7ac8d6709be0] 0(13462) radius_authorize_sterman(): Failure 0(13462) REGISTER: challenging user 0(13462) build_auth_hf(): 'WWW-Authenticate: Digest realm="sip.net4india.com", nonce="3fb37a088e0d83f2084b0221f11e7ac8d6709b e0", qop="auth" ' 0(13462) parse_headers: flags=-1 0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0) 0(13462) receive_msg: cleaning up ----- Original Message ----- From: "Daniel-Constantin Mierla" &lt;Daniel-Constantin.Mierla(a)fokus.fraunhofer.de&gt; To: "Madan" &lt;madan.r(a)net4india.net&gt; Cc: "serusers" &lt;serusers(a)lists.iptel.org&gt; Sent: Thursday, November 13, 2003 5:01 PM Subject: Re: [Serusers] ser/radius Hello, please increase the debug level to a higher value (debug=9), try again and send the logs to us. From your previous mail on the seruser list (subj: radius issue) seems that the Radius server authenticates OK the user. }Daniel On 11/13/2003 12:08 PM, Madan wrote: ----ser.cfg------------ # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) listen=202.71.135.219 /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #modparam("acc", "log_level", 1) #modparam("acc", "radius_flag", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "2"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); break; }; } -----------------logs--------- 0(13437) mod_init(): Database connection opened successfuly acc - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 2(13439) INFO: fifo process starting: 13439 2(13439) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 0(13437) REGISTER: Authenticating user 0(13437) REGISTER: challenging user 0(13437) REGISTER: Authenticating user 0(13437) REGISTER: challenging user 0(13437) REGISTER: Authenticating user 0(13437) REGISTER: challenging user i can not get my sipua registered, please help me to get out of this ----- Original Message ----- From: "Daniel-Constantin Mierla" &lt;Daniel-Constantin.Mierla(a)fokus.fraunhofer.de&gt; To: "Santosh M Hulkund" &lt;santoshmh(a)indts.com&gt; Cc: &lt;serusers(a)lists.iptel.org&gt; Sent: Thursday, November 13, 2003 3:42 PM Subject: Re: [Serusers] Integrating Ser to Jabberd Hello, try with this one: http://www.iptel.org/ser/doc/jabgw/xjab-manual.html Best regards, }Daniel On 11/13/2003 8:01 AM, Santosh M Hulkund wrote: Hi Gurus, Is there any clear document on integrating ser with jabberd. Any pointers, greatly appreciated. Regards, Santosh M Hulkund _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

_______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers