[Users] ERROR: extract_body: message body has length zero

I'm using openser 1.0.1 with rtpproxy and nathelper. Calls are goin through with good audio. Hanging up is fine too. However I've noticed I've been getting errors in my logs: ERROR: extract_body: message body has length zero ERROR: force_rtp_proxy2: can't extract body from the message I'm assuming I'm doin something wrong in my config but I dont know where. Can someone please point out my mistakes? Thank you # start RTPProxy with: rtpproxy -l your_public_ip -s udp:localhost:8899 # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ port=5060 children=4 listen=68.xxx.xxx.xxx alias=test.com check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" # --- module loading loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" loadmodule "/usr/local/lib/openser/modules/permissions.so" # --- setting module parameters modparam("auth_db|permissions|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") # -- usrloc params -- modparam("usrloc", "db_mode", 2) # -- registrar params -- modparam("registrar", "nat_flag", 6) modparam("registrar", "sip_natping_flag", 7) # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- nathelper -- modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_from", "sip:pinger@test.com") # -- tm params -- modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") # -- permissions param -- modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") # --- main routing logic route{ # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # ----------------------------------------------------------------- # NAT detection # ----------------------------------------------------------------- route(2); # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (!method=="REGISTER") record_route(); # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); return; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); }; route(1); }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { route(4); route(1); } else { sl_send_reply("403", "Forbidden"); }; }; if (method=="ACK") { route(1); return; } else if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(5); return; } else if (method=="REGISTER") { route(4); return; }; lookup("aliases"); if (!is_uri_host_local()) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setflag(6); }; if (isflagset(5)||isflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } route[3] { if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); } route[4] { if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; }; if (isflagset(5)) { setflag(6); # if you want OPTIONS natpings uncomment next # setflag(7); }; save("location"); if (!lookup("location")) { sl_reply_error(); }; append_hf("P-hint: usrloc applied\r\n"); } route[5] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; }; lookup("aliases"); if (!is_uri_host_local()) { route(1); return; }; if (uri=~"^sip:[0-9]{3}@") { lookup("aliases"); lookup("location"); route(1); return; }; if(!lookup("location")){ if (uri=~"^sip:[0-9]*@") { route(6); return; }; sl_send_reply("404", "User Not Found"); return; }; route(1); } route[6] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehostport("pstn.gateway:5060"); avp_write("i:45", "inv_timeout"); route(1); } failure_route[1] { if (isflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { if ((isflagset(5) || isflagset(6)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (isflagset(6)) { fix_nated_contact(); } exit; } --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail Beta.