Hi!
Just my two cents. What parameters do you use for mediaproxy? Smth like
RUN_MEDIAPROXY=yes
LISTEN_UDP=127.0.0.1:1111
LISTEN_NG=127.0.0.1:11123
*ADDRESS=XXX.XXX.XXX.XXX*
?
regards,
Alexey
2013/7/26 Khue Nguyen Minh <khuenm(a)vega.com.vn>
Thanks Richard. Now, rtpproxy-ng can work with
mediaproxy-ng. But, I have
some error when run it. After rtpproxy-ng send SDP information to
mediaproxy-ng, it receive wrong IP. please see follow log:
Got valid command from 127.0.0.1:60340: offer - { "sdp":
"v=0#015#012o=doubango 1983 678901 IN IP4 10.0.0.19#015#012s=-#015#012c=IN
IP4 10.0.0.19#015#012t=0 0#015#012a=tcap:1 RTP/AVPF#015#012m=audio 18876
RTP/AVP 0 8 101#015#012a=ptime:20#015#012a=silenceSupp:off - - -
-#015#012a=rtpmap:0 PCMU/8000/1#015#012a=rtpmap:8
PCMA/8000/1#015#012a=rtpmap:101 telephone-event/8000/1#015#012a=fmtp:101
0-16#015#012a=pcfg:1
t=1#015#012a=sendrecv#015#012a=rtcp-mux#015#012a=ssrc:434299437
cname:ldjWoB60jbyQlR6e#015#012a=ssrc:434299437
mslabel:6994f7d1-6ce9-4fbd-acfd-84e5131ca2e2#015#012a=ssrc:434299437
label:Doubango#015#012m=text 2306 RTP/AVP 124 123#015#012a=rtpmap:124
t140/1000#015#012a=fmtp:124 cps=30#015#012a=rtpmap:123
red/1000#015#012a=fmtp:123 124/124/124/124#015#012a=pcfg:1
t=1#015#012a=sendrecv#015#012a=rtcp-mux#015#012", "flags": [
"force",
"auto-bridge" ], "replace": [ "origin" ],
"call-id":
"066cf8f8-fec9-7441-32f1-211298ff1715", "received-from": [
"IP4", "x.x.x.x"
], "from-tag": "15056954", "command": "offer" }
[066cf8f8-fec9-7441-32f1-211298ff1715] Creating new call
Returning to SIP proxy: d3:sdp1022:v=0#015#012o=doubango 1983 678901 IN
IP4 0.0.0.0#015#012s=-#015#012c=IN IP4 *0.0.0.0*#015#012t=0
0#015#012a=tcap:1 RTP/AVPF#015#012a=ice-lite#015#012m=audio 40000 RTP/AVP 0
8 101#015#012a=ptime:20#015#012a=silenceSupp:off - - - -#015#012a=rtpmap:0
PCMU/8000/1#015#012a=rtpmap:8 PCMA/8000/1#015#012a=rtpmap:101
telephone-event/8000/1#015#012a=fmtp:101 0-16#015#012a=pcfg:1
t=1#015#012a=sendrecv#015#012a=ssrc:434299437
cname:ldjWoB60jbyQlR6e#015#012a=ssrc:434299437
mslabel:6994f7d1-6ce9-4fbd-acfd-84e5131ca2e2#015#012a=ssrc:434299437
label:Doubango#015#012a=rtcp:40001#015#012a=ice-ufrag:7YFi3AH6#015#012a=ice-pwd:oZwjQ1y9WJbLLI6mjWMSOOSVMvdQ#015#012a=candidate:rfWFb7Vp3QisWSvf
1 UDP 2130706432 0.0.0.0 40000 typ host#015#012a=candidate:rfWFb7Vp3QisWSvf
2 UDP 2130706431 0.0.0.0 40001 typ host#015#012m=text 40004 RTP/AVP 124
123#015#012a=rtpmap:124 t140/1000#015#012a=fmtp:124
cps=30#015#012a=rtpmap:123 red/1000#015#012a=fmtp:123
124/124/124/124#015#012a=pcfg:1
t=1#015#012a=sendrecv#015#012a=rtcp:40005#015#012a=ice-ufrag:4SUsQrLE#015#012a=ice-pwd:qhLmZW7KFb6W7QOVFEOraZfcQaCG#015#012a=candidate:rfWFb7Vp3QisWSvf
1 UDP 2130706432 0.0.0.0 40004 typ host#015#012a=candidate:rfWFb7Vp3QisWSvf
2 UDP 2130706431* 0.0.0.0 *40005 typ host#015#0126:result2:oke
And in SIP message I capture from network, IP address in SDP body become
0.0.0.0. The call setup success but I don't hear anything. When I hangup
this call, module rtpproxy-ng segment fault, and this is call stack:
#0 bencode_string (bencbuf=0x7fffb6206760, msg=0x7fd617cb13a0,
op=OP_DELETE, flags_str=0x7fd617cd5f90 "fox", body_out=0x0) at bencode.h:349
#1 bencode_list_add_string (bencbuf=0x7fffb6206760, msg=0x7fd617cb13a0,
op=OP_DELETE, flags_str=0x7fd617cd5f90 "fox", body_out=0x0) at bencode.h:407
#2 rtpp_function_call (bencbuf=0x7fffb6206760, msg=0x7fd617cb13a0,
op=OP_DELETE, flags_str=0x7fd617cd5f90 "fox", body_out=0x0) at
rtpproxy.c:1191
Please help me fix it.
Thanks
Khue.
2013/7/24 Richard Fuchs <rfuchs(a)sipwise.com>
On 07/24/13 05:45, Khue Nguyen Minh wrote:
Hi all,
I am using rtpproxy-ng to control mediaproxy-ng. I was install and
config follow this guide:
https://github.com/sipwise/mediaproxy-ng
when I run kamailio with rtpproxy-ng module and mediaproxy-ng I got
error:
mediaproxy-ng[25216]: Failed to properly parse
UDP command line '30514_2
d7:command4:pinge' from 127.0.0.1:54621 <http://127.0.0.1:54621>, using
fallback RE
ERROR: rtpproxy-ng [rtpproxy.c:1381]: rtpp_test(): proxy responded with
invalid response
As a quick guess, I'd say that you used the -u option instead of the -n
option (or --listen-udp instead of --listen-ng). Substitute one for the
other and it should work.
cheers
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users