26 Dec
2015
26 Dec
'15
12:33 p.m.
Hello, friend.
Actually I set my rtpengine on a physical machine before I sent you my first reply to you.
Problem still exists.
Now I changed some iptables rules and I can get info from “cat list” under the table 0. It
prints these:
local inet4 10.109.247.87:30008
src inet4 10.109.247.87:30058
dst inet4 10.205.42.195:56220
stats: 14964 bytes, 87 packets, 0
errors
RTP payload type 0: 0 bytes, 0 packets
RTP payload type 3: 0 bytes, 0 packets
RTP payload type 8: 0 bytes, 0 packets
RTP payload type 9: 0 bytes, 0 packets
RTP payload type 101: 0 bytes, 0 packets
RTP payload type 105: 0 bytes, 0 packets
RTP payload type 106: 0 bytes, 0 packets
local inet4 10.109.247.87:30042
src inet4 10.109.247.87:30066
dst inet4 10.205.42.195:55744
stats: 77399 bytes, 68 packets, 0
errors
RTP payload type 96: 0 bytes, 0 packets
local inet4 10.109.247.87:30058
src inet4 10.109.247.87:30008
dst inet4 10.205.42.195:33875
stats: 14448 bytes, 84 packets, 0
errors
RTP payload type 0: 0 bytes, 0 packets
RTP payload type 3: 0 bytes, 0 packets
RTP payload type 8: 0 bytes, 0 packets
RTP payload type 9: 0 bytes, 0 packets
RTP payload type 96: 0 bytes, 0 packets
RTP payload type 97: 0 bytes, 0 packets
RTP payload type 98: 0 bytes, 0 packets
RTP payload type 99: 0 bytes, 0 packets
RTP payload type 101: 0 bytes, 0 packets
RTP payload type 102: 0 bytes, 0 packets
RTP payload type 103: 0 bytes, 0 packets
RTP payload type 105: 0 bytes, 0 packets
RTP payload type 106: 0 bytes, 0 packets
RTP payload type 107: 0 bytes, 0 packets
RTP payload type 108: 0 bytes, 0 packets
RTP payload type 109: 0 bytes, 0 packets
local inet4 10.109.247.87:30066
src inet4 10.109.247.87:30042
dst inet4 10.205.42.195:39177
stats: 34105 bytes, 34 packets, 0
errors
RTP payload type 96: 0 bytes, 0 packets
RTP payload type 97: 0 bytes, 0 packets
RTP payload type 102: 0 bytes, 0 packets
But I still got info like this:
Dec 26 18:29:30 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30383] More than 30 duplicate
packets detected, dropping packet to avoid potential loop
Dec 26 18:29:30 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30403] More than 30 duplicate
packets detected, dropping packet to avoid potential loop
Dec 26 18:29:31 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30375] More than 30 duplicate
packets detected, dropping packet to avoid potential loop
Dec 26 18:29:32 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30375] More than 30 duplicate
packets detected, dropping packet to avoid potential loop
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30382] Confirmed peer address as
10.205.42.195:47974
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30342] Confirmed peer address as
10.205.42.195:64642
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30342] Kernelizing media stream:
10.205.42.195:64642
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30402] Confirmed peer address as
10.205.42.195:48421
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30382] Kernelizing media stream:
10.205.42.195:47974
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30374] Confirmed peer address as
10.205.42.195:58668
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30374] Kernelizing media stream:
10.205.42.195:58668
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30402] Kernelizing media stream:
10.205.42.195:48421
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30375] Confirmed peer address as
10.205.42.195:58669
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30375] More than 30 duplicate
packets detected, dropping packet to avoid potential loop
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30343] Confirmed peer address as
10.205.42.195:64643
Dec 26 18:29:34 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30343] More than 30 duplicate
packets detected, dropping packet to avoid potential loop
Dec 26 18:29:35 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30375] More than 30 duplicate
packets detected, dropping packet to avoid potential loop
Dec 26 18:29:35 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30403] Confirmed peer address as
10.205.42.195:36390
Dec 26 18:29:35 localhost rtpengine[2946]:
[79049NzkxNmM1ZjAyMDMxYTgyYTI1NzBmNzQxN2YyOWIzNGU port 30383] Confirmed peer address as
10.205.42.195:34933
The video call is great without much delay or noise. So any reasons else? Should I still
concern about this log info?
在 2015年12月26日，03:32，Mititelu Stefan
<fanx07(a)gmail.com> 写道：
1.In fact I am not quite sure about what you mean for the first question. I am running
the rtpengine daemon downloaded from github, sip wise/rtpengine.
What does 'dpkg -l | grep rtp' show?
2.There is nothing prompt on command cat /proc/rtpengine/0/list. The file is 0 bytes and
empty.
That means your streams are not kernelized and all the traffic passes through user
space. I have never run rtpengine software on a virtual machine so I don't know if it
should kernelize the streams in this case; you could try it. On real hardware, it should.
Thus you should get rid of those errors.
Check point '1.' and make sure that you have the necessary packages needed for
kernelizing the streams referred in [1] (i.e. ngcp-rtpengine-kernel-dkms,
ngcp-rtpengine-iptables) along with the rtpengine daemon (ngcp-rtpengine-daemon); those
should be the minimum packages needed. Grep the README for "in-kernel" keyword
for more info.
3.Our kamailio is using loose route.
I was asking about "strict source" form README [1]. Nothing related to
kamailio's 'lr=' parameter (if that is what you meant). However your problem
is at point 2.
Regards,
Stefan Mititelu
[1] https://github.com/sipwise/rtpengine <https://github.com/sipwise/rtpengine>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
------------------------------------
北京邮电大学网络技术研究院
网络与交换技术国家重点实验室
田军
+86 18810315790
mozillafire(a)bupt.edu.cn
------------------------------------