5 Sep
2007
5 Sep
'07
10:49 a.m.
El Tuesday 04 September 2007 15:37:46 Iñaki Baz Castillo escribió:
El Tuesday 04 September 2007 15:03:25 Dan escribió:
I'd like to insist on this. The problem is there: the provider SHOULD send the
BYE (in-dialog BYE containing "Route" header) to the URI indicated in
the "Contact" header that OpenSer sent to provider.
But instead of that, the provider sens the BYE to a wrong URI
(sip:test@78.45.146.34).
Could you do a ngrep when a call from PAP2 to other PAP2?
ngrep -d any -P ' ' -W byline -T -t "$*" udp port 5060
--
Iñaki Baz Castillo
ibc(a)in.ilimit.es
Full ngrep log attached.
In the INVITE OpenSEr sends to your provider is appears:
## U 78.45.146.34:5060 -> 212.34.169.220:5060
INVITE sip:1217773456@212.34.169.220:5060 SIP/2.0.
Record-Route: <sip:78.45.146.34;ftag=6613ce14;lr>.
To: <sip:1217773456@78.45.146.34>.
From: 58.68.96.11<sip:test@78.45.146.34>;tag=6613ce14.
Call-ID: 757a270529254e41.
...
Contact: <sip:test@72.55.124.23:5060> <---- **1**
But in the BYE from your provider it appears:
## U 212.34.169.220:5060 -> 78.45.146.34:5060
BYE sip:test@78.45.146.34 SIP/2.0. <---- **2**
Route: <sip:78.45.146.34;ftag=6613ce14;lr>.
From: <sip:1217773456@78.45.146.34>;tag=04093807084639921117967993.
Call-ID: 757a270529254e41.
To: 58.68.96.11<sip:test@78.45.146.34>;tag=6613ce14.
...
That is wrong, the **2** field should be the same as **1** in order to
OpenSer route the BYE to EyeBeam. Because the URI is 78.45.146.34
(OpenSer's IP) then the BYE arrives to OpenSer, it reads "Route:
78.45.146.34" so it deletes the "Route" header and sends again the BYE to
himself. But this time there is not a "Route" header so the message is NOT
in dialog.