Re: [Serusers] a problem about module jabber

From: Daniel-Constantin Mierla <daniel(a)iptel.org> Reply-To: daniel(a)iptel.org To: C Y <cyatx1234(a)hotmail.com> CC: serusers(a)lists.iptel.org Subject: Re: [Serusers] a problem about module jabber Date: Mon, 25 Oct 2004 11:00:32 +0200 Have you compiled and installed the jabber module? It is not compiled by default. If you did it, then run ser in debug mode (set debug=9 and log_stderror=yes in your config file) and send the output to me. Daniel On 10/25/04 07:28, C Y wrote: > Hi everyone: > > I have a problem when I configure the SIP server. > I add the clause "loadmodule "/usr/local/lib/ser/modules/jabber.so"" > into the file "ser.cfg". And run "ser stop" or "ser start".There is a > error: "ERROR: bad config file (1 errors)". > Why I cannot load the module "jabber.so" and where can I find some > infomation about module jabber.so? > > These are some informations related to my setting and problem: > 1、operating system:Linux 7.0 > 2、SER distribution: ser-0.8.14_linux_i386.tar.gz > 3、SER build: version: 0.8.14 (i386/linux) > flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, > SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, > MAX_URI_SIZE 1024, BUF_SIZE 65535 > @(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ > main.c compiled on 12:28:01 Jul 27 2004 with gcc 2.95 > 4、SER configuration file : > # > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode debug=7 > fork=yes > log_stderror=no > */ > > check_via=yes # (cmd. line: -v) > dns=yes # (cmd. line: -r) > rev_dns=yes # (cmd. line: -R) > port=5060 > #children=4 > fifo="/tmp/ser_fifo" > > alias="voipv6.edu.cn" "210.25.130.252" "localhost" > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/local/lib/ser/modules/mysql.so" > > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > loadmodule "/usr/local/lib/ser/modules/acc.so" > loadmodule "/usr/local/lib/ser/modules/exec.so" > loadmodule "/usr/local/lib/ser/modules/group.so" > loadmodule "/usr/local/lib/ser/modules/msilo.so" > loadmodule "/usr/local/lib/ser/modules/print.so" > loadmodule "/usr/local/lib/ser/modules/textops.so" > #loadmodule "/usr/local/lib/ser/modules/jabber.so" > loadmodule "/usr/local/lib/ser/modules/uri.so" > loadmodule "/usr/local/lib/ser/modules/vm.so" > > > # ----------------- setting module-specific parameters --------------- > > modparam("usrloc","db_url","sql://ser:heslo@localhost/ser") > > > # -- usrloc params -- > > # Uncomment this if you want to use SQL database # for persistent > storage and comment the previous line > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in this > config), # uncomment also the following parameter) > # > modparam("auth_db", "password_column", "password") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("voipv6.edu.cn", "subscriber")) { > www_challenge("voipv6.edu.cn", "0"); > break; > }; > > save("location"); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > > } > > _________________________________________________________________ > 免费下载 MSN Explorer: http://explorer.msn.com/lccn > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >