Re: [Users] No logging. OpenSER on OpenBSD

Ben,

try to start openser with : debug = 9 log_stderror = yes fork = no

this will start in foreground with logging to the console - let see if this gets you any results. Then try to set fork=yes and see if still working.

In case you are pushing some options via cl parameters, note that script has priority over cl params!

regards, bogdan

Ben Ferguson - backcountry.com wrote:

Thanks bogdan for your input so far. But, this...

...

Hi Ben,

-d Debugging mode (multiple -d increase the level) -E Log to stderr

you can get the same from cfg with debug = 9 log_stderror = yes

so your openser will not use syslog, but standard error for logging.

...will not actually work for me. After the default wasn't working, that's the first thing I tried to change in my config and it didn't do anything for me.

And I'm not sure exactly what you mean here... It sounds like you are asking if I've tried the default setup...

...

now, regarding syslog logging - have you tried not to use the log facility stuff? do not set it in either in cfg, neither in syslog.cfg ....openser should normally log to the default log file.

regards, bogdan

Thanks, Ben

...

...

Ben Ferguson - backcountry.com wrote: Hmmmm. Interestingly, if i:

#openser -E -dddddddddddddd

I get all sorts of good logging sent to my console:

3(990)  version: <SIP/2.0>
3(990) parse_headers: flags=2
3(990) Found param type 232, <branch> = <z9hG4bK40b3.2f0d0803.0>; state=16
3(990) end of header reached, state=5
3(990) parse_headers: Via found, flags=2
3(990) parse_headers: this is the first via
3(990) After parse_msg...
3(990) preparing to run routing scripts...
3(990) parse_headers: flags=8
3(990) DEBUG: add_param: tag=329cfeaa6ded039da25ff8cbb8668bd2.d88a
3(990) DEBUG:parse_to:end of header reached, state=29
3(990) DBUG:parse_to: display={}, ruri={sip:1001@192.168.1.105}
3(990) DEBUG: get_hdr_field: <To> [67]; uri=[sip:1001@192.168.1.105]
3(990) DEBUG: to body [<sip:1001@192.168.1.105>]
3(990) parse_headers: flags=100
3(990) get_hdr_field: cseq <CSeq>: <43365> <ACK>
3(990) DEBUG: get_hdr_body : content_length=0
3(990) found end of header
3(990) DEBUG: is_maxfwd_present: max_forwards header not found!
3(990) DEBUG: add_param: tag=1142574036
3(990) DEBUG:parse_to:end of header reached, state=29

Now just to figure out how to pass the -E and -dddddddd options to openserctl and redirect it to a text file... I may be on to >>something here that'll work for my setup

-Ben-

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users