[Serusers] ser 0.8.14-4 and sems

Hi List, I'm tryin to configure ser with sems, on a RedHat version 9. I'm receiving this errors: Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command DB is not available Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server:n command must begin with :: email_address Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must begin with :: subscriber Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must have at least 3 chars Feb 9 01:36:00 sip Sems[4816]: Error: (AmSession.cpp)(startSession)(468): 404 voicemail: no email address for user <1002> Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command t_reply is not available Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must begin with :: voicemail: no email address for user <1002> Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must begin with :: 000012D07BAA2BC1 Feb 9 01:36:00 sip ser[4781]: ERROR: fifo_server: command must have at least 3 chars Feb 9 01:36:00 sip Sems[4816]: Error: (AmRequest.cpp)(reply)(335): AmRequestUAS::reply: 500 command 't_reply' not available Can anyone help me with this, thank you in advanced. I've attached my ser.cfg and sems.conf below. ----- start of ser.cfg ----- # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=192.168.0.2 alias="sip.nhadzter.com" alias="nhadzter.com" alias="192.168.0.2" fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ----------------- voicemail parameters --------------- #modparam("voicemail", "db_url","/home/rco/cvs/ser/sip_router/modules/vm/db") modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") modparam("voicemail", "email_column", "email_address") modparam("voicemail", "subscriber_table", "subscriber") modparam("voicemail", "user_column", "username") modparam("voicemail", "domain_column", "domain") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("nhadzter.com", "subscriber")) { www_challenge("nhadzter.com", "0"); break; }; save("location"); break; }; # Voicemail specific configuration - begin if(method=="ACK" || method=="INVITE" || method=="BYE" || method=="REFER"){ if(t_newtran()){ t_reply("100","Trying -- just wait a minute !"); if(method=="INVITE" || method=="REFER"){ log("**************** vm start - begin ******************\n"); if( uri =~ "conference" ){ if(!vm("/tmp/am_fifo","conference")){ log("could not contact conference server\n"); t_reply("500","could not contact conference server"); }; } else if( uri =~ "echo" ){ if(!vm("/tmp/am_fifo","echo")){ log("could not contact echo\n"); t_reply("500","could not contact echo"); }; } else { if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact voicemail\n"); t_reply("500","could not contact voicemail"); }; }; log("**************** vm start - end ******************\n"); break; }; if(method=="BYE"){ log("**************** vm end/refer - begin ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the media server\n"); t_reply("500","could not contact the media server"); }; log("**************** vm end/refer - end ********************\n"); break; }; } else { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); }; }; # Voicemail specific configuration - end # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } ------------- end of ser.cfg ------------------ ---------start of sems.conf ----------------------- # $Id: sems.conf.sample,v 1.11.2.1 2004/01/27 15:08:28 rco Exp $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # # # whitespaces (spaces and tabs) are ignored # comments start with a "#" and may be used inline # # example: option=value1, value2 # i like this option # ################################## # global parameters # ################################## # optional parameter: fork={yes|no} # # - specifies if sems should run in daemon mode (background) # (fork=no is the same as -E) fork=yes # optional parameter: stderr={yes|no} # # - debug mode: do not fork and log to stderr # (stderr=yes is the same as -E) stderr=no # optional parameter: loglevel={0|1|2|3} # # - sets log level (error=0, warning=1, info=2, debug=3) # (same as -D) loglevel=1 # optional parameter: fifo_name=<filename> # # - path and file name of our fifo file (same as -i) fifo_name=/tmp/am_fifo # optional parameter: ser_fifo_name=<filename> # # - path and file name of Ser's fifo file (same as -o) ser_fifo_name=/tmp/ser_fifo # optional parameter: plugin_path=<path> # # - sets the path to the plug-ins # - may be absolute or relative to CWD plugin_path=/usr/local/lib/sems/plug-in/ # optional parameter: smtp_server=<hostname> # # - sets address of smtp server smtp_server=localhost # optional parameter: smtp_port=<port> # # - sets port of smtp server smtp_port=25 ################################## # module specific parameters # ################################## # sample voicemail configuration (inline) config.voicemail=inline # optional parameter: announce_path=<path> # # - sets the path where announce files are searched for # - the file to be played is determined the following way: # <announce_path>/<domainname>/<username>.wav # if this file is not available <announce_path>/<default_anounce> is used announce_path=/usr/local/lib/sems/audio/ # parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav # parameter: max_record_time=<seconds> # # - maximum record time max_record_time=30 # parameter: accept_delay=<x> # # - delays accepting of the call for x seconds # - default value is 0 accept_delay=20 # end of configuration section # for voicemail module config.voicemail=end # sample announcement configuration (inline) config.announcement=inline # optional parameter: announce_path=<path> # # - sets the path where announce files are searched for announce_path=/usr/local/lib/sems/audio/ # parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav # end of configuration section for announcement module config.announcement=end # sample isdngw module configuration (external file) # config.isdngw=/etc/isdngw.conf # sample ivr module configuration (inline) config.ivr=inline #parameter: python_script_path=<full path> python_script_path=/etc/ivr #parameter: python_script_file=<filename> python_script_file=example.py # end of configuration section for ivr module config.ivr=end # sample conference configuration (inline) config.conference=inline # parameter: default_announce=<filename> # # - sets the full pathed name of the default announce WAV file. # Will be played to lonely users. default_announce=/usr/local/lib/sems/audio/first_participant.wav # end of configuration section for conference module config.conference=end # example configuration for number reader config.number_reader=inline number_path=/usr/local/lib/sems/audio/ prolog_file=welcome_to_number_reader.wav epilog_file=thanks_calling_number_reader.wav # end of number_reader configuration config.number_reader=end # add more module configurations here (inline or external): # # config.mymodule=<filename> # or # config.mymodule=inline # ... # config.mymodule=end ------------- end of sems.conf ------------------- -- -- iTouch Communications, Inc.