Hi All,
How do I check whether the SIP registration request hits the server, I cannot find these in the debug. At what level of debug should I run to see the SIP requests between the server and the client.
Thanks
Deen
----- Original Message ----- From: "Jan Janak" jan@iptel.org To: "deen" deen@slt.lk Cc: "Nils Ohlmeier" nils@iptel.org; serusers@lists.iptel.org; "Jiri Kuthan" jiri@iptel.org Sent: Wednesday, January 14, 2004 1:44 AM Subject: Re: [Serusers] ser probs
Probably if (uri==myself) condition doesn't match the hostname or IP address in the Request-URI of the message. SER prints all IP addresses and hostnames that will be matched by the condition when it starts. If the hostname/IP address is not there, use listen and/or alias directive to add it.
See also the archives of the mailing list, this has been discussed many times.
Jan.
On 14-01 08:22, deen wrote:
Thanks Nils, I started with debug mode off. And the registration fails
with
registration denied: (SIP/2.0 483 Too Many Hops)
Now I suspect the request is coming to the server but there is a routing issue. Any idea why this could be.
Deen
----- Original Message ----- From: "Nils Ohlmeier" nils@iptel.org To: "deen" deen@slt.lk; serusers@lists.iptel.org; "Jiri Kuthan" jiri@iptel.org Sent: Tuesday, January 13, 2004 6:19 AM Subject: Re: [Serusers] ser probs
On Wednesday 14 January 2004 02:32, deen wrote:
Jiri,
Thanks for the info.
Also I cannot register from a SIP client I get an error.
Proxy registration failed. Reason : general registration failure
(Client
non-INVITE transaction [Trying]: timed out.
That's easy -- either the client didn't deliver the REGISTER to
SER,
(misconfiguration?) or the reply was not delivered (for example
because
of NAT presence).
There is definitely no NAT here. I am pretty new to this - what
could be
the likely misconfiguration.
When your SER listens only on 127.0.0.1, because you use debug mode,
then
no
client (except clients running on the same host) can reach the server.
Nils
Thanks
Deen
----- Original Message ----- From: "Jiri Kuthan" jiri@iptel.org To: deen@slt.lk; serusers@lists.iptel.org Sent: Monday, January 12, 2004 6:20 AM Subject: Re: [Serusers] ser probs
At 12:59 AM 1/13/2004, M.I.Deen wrote:
Dear List,
My serctl ps shows very less processes see below.
/usr/sbin/serctl ps 0 24442 stand-alone receiver @ 127.0.0.1:5060 1 24444 timer 2 24446 fifo server 3 0 4 0 5 0 6 0 7 0
I wonder whether this is typical.
it is, if you started SER in debugging mode.
Also I cannot register from a SIP client I get an error.
Proxy registration failed. Reason : general registration failure
(Client
non-INVITE transaction [Trying]: timed out.
That's easy -- either the client didn't deliver the REGISTER to
SER,
(misconfiguration?) or the reply was not delivered (for example
because
of NAT presence).
-jiri
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers