Ok I was able to get the inbound call to ring
to user 5002 I had to add Provider IP to
# authenticate
calls
if(!www_authorize("voip.mydomain.com","subscriber"))
{
# you didn't send me credentials Maybe I trust your
IP?
if (src_ip=~"216.8.xx.*" || src_ip=~"24.206.xxx.*" || src_ip=~"69.28.xxx.*")
{
log(1,"Incoming call from trusted
IP");
} else
{
# I don't trust this IP.. ask for
credentials
www_challenge("voip.mydomain.com",
"0");
break;
}
}
But once I answer 5002 it is dead air on
the 5002 and the PSTN phone keeps ringing until call could not be
completed.
No. Time
Source
Destination Protocol Info
31
2.248714 216.8.xxx.xx 65.175.xxx.xxx
SIP Status: 200 OK
120 10.499698
69.28.x.xxx 216.8.xxx.xx SIP/SDP Request:
INVITE sip:16049094251@216.8.xxx.xx:5060,
125 10.513795
216.8.xxx.xx 69.28.x.xxx
SIP Status: 100 trying -- your call is important
to us
126 10.513918 216.8.xxx.xx 65.175.xxx.xxx
SIP/SDP Request: INVITE sip:5002@65.175.xxx.xxx:5060,
128
10.580401 65.175.xxx.xxx 216.8.xxx.xx
SIP Status: 100 Trying
129
10.597017 65.175.xxx.xxx 216.8.xxx.xx
SIP Status: 180 Ringing
130
10.597219 216.8.xxx.xx 69.28.x.xxx
SIP Status: 180 Ringing
186
15.502397 69.28.x.xxx 216.8.xxx.xx
SIP Request: CANCEL sip:16049094251@216.8.xxx.xx:5060
187
15.502684 216.8.xxx.xx 65.175.xxx.xxx
SIP Request: CANCEL
sip:5002@65.175.xxx.xxx:5060
188 15.502851 216.8.xxx.xx
69.28.x.xxx SIP Status:
200 canceling
190 15.569267 65.175.xxx.xxx
216.8.xxx.xx SIP Status: 487 Request
Terminated
191 15.569386 216.8.xxx.xx 65.175.xxx.xxx
SIP Request: ACK
sip:5002@65.175.xxx.xxx:5060
192 15.569550 216.8.xxx.xx
69.28.x.xxx SIP Status:
487 Request Terminated
193 15.573890 65.175.xxx.xxx
216.8.xxx.xx SIP Status: 200 OK
198
15.929421 216.8.xxx.xx 69.28.x.xxx
SIP Status: 487 Request Terminated
214
17.308191 65.175.xxx.xxx 216.8.xxx.xx
SIP Request: NOTIFY sip:216.8.xxx.xx
215
17.308387 216.8.xxx.xx 65.175.xxx.xxx
SIP Status: 200 OK
223 17.933116
216.8.xxx.xx 69.28.x.xxx
SIP Status: 487 Request Terminated
397
32.367404 65.175.xxx.xxx 216.8.xxx.xx
SIP Request: NOTIFY sip:216.8.xxx.xx
398
32.367590 216.8.xxx.xx 65.175.xxx.xxx
SIP Status: 200 OK
65.175.* IP is my ATA Test Box user 5002
69.28.*
is the DID Provider
216.8.* is the SER box
Considering this box was
designed orignally for outbound only I am wondering if I have to send a
response back to our DID provider to let them know it was answered??
I have searched for example configs utilizing in & outbound and have come up
short
Thx again for any help
Eric