it seems you call force_rtp_rpoxy() twice, as you get the port two times as well as the ip address. Check your config.
On 06/22/2009 01:46 PM, Pascal Maugeri wrote:
If I understood correctly you want me to test the patch nhelpr_func.c you've done in sr in kamailio ?
This is what I've done and at least it compiles :-)
(I also tried to compile sr, but I need to sudy it a bit more as I've never installed sr so far)
Nevertheless, the ouput payload is wrong:
Content-Type: application/sdp
v=0
o=- 3454665275 3454665275 IN IP4 10.1.1.248
s=pjmedia
c=IN IP4 88.29.163.14288.29.163.142
t=0 0
a=X-nat:0
m=audio 5191251912 RTP/AVP 115
[...]
m=application 4198041980 udp TBCP
The RTP and RTCP ports are wrong: 5191251912 and 4198041980 ?!
Where could I have a look in nathelper source to see what is wrong ?
Cheers,
Daniel
-pascal
On Mon, Jun 22, 2009 at 11:36 AM, Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> wrote:
Hello Pascal,
I have just committed support for multipart bodies in sip router,
if works then I will backport to 1.5.
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=1f41271e1c1b879217835b8b3fdbdc2680138f25
Can you test it? Unfortunately I cannot do it these days properly
due to traveling. Patch should work pretty straightforward with
1.5 though, if you want to test it directly there.
Cheers,
Daniel
On 06/22/2009 11:30 AM, Pascal Maugeri wrote:
I tried to install mediaproxy but it looks tricky to install
(many dependencies, including kernel specific configurations) :-(
and I would like to stick to rtpproxy for performance reason.
Do you believe the same workaround using textops/filter_body
can be used using rtpproxy ? I think yes as these are two
different things as said Juha.
Regards,
Pascal
On Fri, Jun 19, 2009 at 9:26 PM, Pascal Maugeri
<pascal.maugeri@gmail.com <mailto:pascal.maugeri@gmail.com>
<mailto:pascal.maugeri@gmail.com
<mailto:pascal.maugeri@gmail.com>>> wrote:
On Fri, Jun 19, 2009 at 9:13 PM, Juha Heinanen
<jh@tutpro.com <mailto:jh@tutpro.com>Users@lists.kamailio.org <mailto:Users@lists.kamailio.org><mailto:jh@tutpro.com <mailto:jh@tutpro.com>>> wrote:
Pascal Maugeri writes:
> So if I understand well (please correct me if I'm wrong)
the "plan" is:
>
> 1º) I install MediaProxy and use Kamailio MEDIAPROXY
module
instead of
> rtpproxy/NATHelper
>
> 2º) filter the app/sdp part with
>
> if (has_body("multipart/mixed")) {
> if (filter_body("application/sdp") {
> remove_hf("Content-Type");
>
> append_hf("Content-Type: application/sdp\r\n");
> } else {
>
> xlog("Body part application/sdp not found\n");
> }
> }
you don't need to call filter_body if you use mediaproxy.
> 3º) then engage the media proxy with
>
> if (method==INVITE && !has_totag()) {
>
> # We can also use a specific media relay if we
need to
> #$avp(s:media_relay) = "1.2.3.4";
> engage_media_proxy();
> }
i have never used engage_media_proxy() functions,
because it
makes some
assumptions that are not generally true. i use
use_media_proxy() instead.
> 4º) finally put the body part(s) that have been
removed in
1º) and relay the
> INVITE to my next hop.
> I believe I can save the body part(s) in 1º)
and put
them back using
> set_body(txt, content_type).
you don't need to do anything like that if you use
use_media_proxy()
function, because it does not remove anything.
Thanks Juha ! I can't wait for monday to test it :-)
Have a nice week-end
Pascal
-- juha
------------------------------------------------------------------------
_______________________________________________
Kamailio (OpenSER) - Users mailing list