22 Nov
2016
22 Nov
'16
9:46 p.m.
Hello,
got a bit of time to look at the code and discovered that there is a rpc
command tm.t_uac_start added by ser guys that might get you moving
forward. It is not waiting for the reply of the generated request and
you can use it with json rpc exec function in the config, so it avoids
using exec.
Can you give it a try?
Some documentation can be found in the comments of the function used by
this command:
-
https://github.com/kamailio/kamailio/blob/master/modules/tm/rpc_uac.c#L399
Cheers,
Daniel
On 22/11/2016 18:35, Jonathan Hunter wrote:
Hi Daniel,
Thanks here you go;
[root@POC_ProxyA kamailio]# kamctl mi t_uac_dlg INFO
sip:3003@193.144.1.112 . udp:10.70.1.136:5060
\"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""
404 Invalid local socket
[root@POC_ProxyA kamailio]# VERBOSE=1 kamctl mi t_uac_dlg INFO
sip:3003@193.144.1.112 . udp:10.70.1.136:5060
\"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""
database engine 'MYSQL' loaded
Control engine 'FIFO' loaded
entering fifo_cmd t_uac_dlg INFO sip:3003@193.144.1.112 .
udp:10.70.1.136:5060 "From:sip:1234@8.8.8.8
To:sip:3003@193.144.1.112
Contact:sip:daemon@8.8.8.8
"
404 Invalid local socket
FIFO command was:
:t_uac_dlg:kamailio_receiver_23469
INFO
sip:3003@193.144.1.112
.
udp:10.70.1.136:5060
"From:sip:1234@8.8.8.8
To:sip:3003@193.144.1.112
Contact:sip:daemon@8.8.8.8
"
Thanks
Jon
------------------------------------------------------------------------
*From:* Daniel-Constantin Mierla <miconda(a)gmail.com>
*Sent:* 22 November 2016 13:10
*To:* Jonathan Hunter; Kamailio SER - Users Mailing List
*Subject:* Re: [SR-Users] Send SIP Info within a dialog using
$uac_req(method)="INFO"
Hello,
I am trying to figure out why the kamctl is not passing further the
params. Can you set VERBOSE=1 in kamctlrc or just run like:
VERBOSE=1 kamctl mi ...
It should print the command sent over the fifo file. Send the output
here so I can check it.
Cheers,
Daniel
On 21/11/2016 18:38, Jonathan Hunter wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
Hello,
Thanks Daniel, knowing how I should specify all the parameters would
be great, just a syntax example, in particular when defining all the
sip headers and why their are double quotes/single quotes or what
best method is.
Thanks again and sorry for the noise!
Jon
something seems to be strange with interpreting the parameters from
command line and forwarding them to kamailio. I will dig a bit into
kamctl and come back with some hints.
Cheers,
Daniel
On 21/11/16 13:19, Jonathan Hunter wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
Hello.
This is running from command line, not withing the configuration
file, so I am testing before I try to add it in.
I have tried with single quotes, but not sure how to enclose the SIP
headers and the r/n , can you please advise?
kamctl mi t_uac_dlg INFO sip:3003@193.144.1.112 .
udp:10.70.1.136:5060
\"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""
As I have tried;
kamctl mi t_uac_dlg 'INFO' 'sip:3003@193.144.1.112' '.'
'udp:10.70.1.136:5060'
'From:sip:1234@8.8.8.8'r\n'To:sip:3003@193.144.1.112'\r\n'Contact:sip:daemon@8.8.8.8'\r\n\'
And still get invalid socket, as it is including all the SIP headers
in with the port parameter so I presume I am missing an operator?
/usr/sbin/kamailio[28999]: ERROR: <core> [main.c:1128]:
parse_phostport(): too many colons in
udp:10.70.1.136:5060From:sip:1234@8.8.8.8rnTo:sip:3003@193.144.1.112rnContact:sip:daemon@8.8.8.8rn'
Its including them all as the local socket/port.
Thanks
Jon
------------------------------------------------------------------------
*From:* Daniel-Constantin Mierla <miconda(a)gmail.com>
*Sent:* 21 November 2016 11:29
*To:* Jonathan Hunter; Kamailio SER - Users Mailing List
*Subject:* Re: [SR-Users] Send SIP Info within a dialog using
$uac_req(method)="INFO"
Hello,
On 20/11/16 16:12, Jonathan Hunter wrote:
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
Hello,
Ok great thanks Daniel.
One final thing, I cant seem to get kamilio to except the parameter
when I add the socket parameter in the kamctl mi t_uac_dlg command.
If I add as below I get 404 invalid local socket;
kamctl mi t_uac_dlg INFO sip:3003@193.144.1.112 .
udp:10.70.1.136:5060
\"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""
do you run this command from command line or from kamailio.cfg? I
think it's good to be sure it works from command line.
Also, can you try to enclose each parameter in single quotes -- then
it's easier for the command line parser to identify the parameters.
Cheers,
Daniel
> 404 Invalid local socket
>
> As its picking up the socket with the from address included as
> well, is this again around syntax?
>
> ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in
> udp:10.70.1.136:5060"From:sip:1234@8.8.8.8
>
> As it seems to pick socket up ok;
>
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG:
> mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <INFO>
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG:
> mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val
> <sip:3003@193.144.1.112>
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG:
> mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <.>
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG:
> mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val
> <udp:10.70.1.136:5060>
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG:
> mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val
> <From:sip:1234@8.8.8.8
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG:
> mi_fifo [mi_parser.c:84]: mi_parse_node(): end of fifo input tree
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG:
> mi_fifo [fifo_fnc.c:507]: mi_fifo_server(): done parsing the mi tree
> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: ERROR: <core>
> [main.c:1128]: parse_phostport(): too many colons in
> udp:10.70.1.136:5060"From:sip:1234@8.8.8.8
>
>