RE: [Serusers] SER/MediaProxy Audio issues - NEED HELP

I just tried all of that.. Still no luck. I even made sure the UA’s were using ports 10000 and higher. Any other suggestions? marc _____ From: Ali Zaidi [mailto:aligzaidi@gmail.com] Sent: Monday, July 24, 2006 4:56 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Ok, try restarting ser + MySQL + MediaProxy then reregister your both ATA. let me know, Ali On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@ivalve.net"m.rys@ivalve.net> wrote: Ali, Thank you for helping. I've changed my mediaproxy.ini file to the following. But the one way audio is still happening. Marc ----------------------------------------------------------- Mediaproxy.ini ----------------------------------------------------------- [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = HYPERLINK "http://12.178.142.235"12.178.142.235 # This is where OpenSER installed portRange = 10000:10100 TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc ________________________________________ From: Ali Zaidi [mailto:HYPERLINK "mailto:aligzaidi@gmail.com"aligzaidi@gmail.com] Sent: Monday, July 24, 2006 4:40 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Mediaproxy.ini has not RTP ports declare. ;portRange = 2000:8000 # These values are set same in ATA's configs <- 2000:8000 range conflict with 5060. Try following, portRange = 10000:10100 then restart mediaproxy. Let me know if you still have problem, i can help further. Ali... On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@rystec.com" m.rys(a)rystec.com&gt; wrote: Hello All, I'm fairly new to SER / Mediaproxy.I've been following the examples from HYPERLINK "http://onsip.org"onsip.org using the latest Getting started docs. At this point I'm testing with two Grandstream Handytone 486 UA' s.One NAT'd, one not. Please check out the following URL to see a diagram explaining my setup. HYPERLINK "http://marc.ivalve.net/ser/gif_1.gif"http://marc.ivalve.net/ser/gif_1.gif "UA-2" cannot hear anything spoken from "UA-1", although I can hear what is said from "UA-2" on "UA-1", but not vice versa.2-way voice is not happening. Both UA's do register to SER.The NAT'd UA couldn't register until I got Mediaproxy installed.Mediaproxy does appear to start with out errors. Below are my Ser.cfg and Mediaproxy.ini. Please Help. Marc Ser.cfg -------------------------------------------------------------- #5a-mysql-mediaproxy-ser.cfg debug=3 fork=yes log_stderror=no listen=XXX.XXX.XXX.235 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("XXX.XXX.XXX.235:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ------------------------------------------------------------------------ # REGISTER Message Handler # ------------------------------------------------------------------------ sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { #----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ------------------------------------------------------------ mediaproxy.ini ------------------------------------------------------------ [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = XXX.XXX.XXX.235# This is where OpenSER installed ;portRange = 2000:8000# These values are set same in ATA's configs for RTP Range TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list HYPERLINK "mailto:Serusers@lists.iptel.org"Serusers@lists.iptel.org HYPERLINK "http://lists.iptel.org/mailman/listinfo/serusers"http://lists.iptel.org/mai lman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006