RE: [Users] next_gw(): No ruri_user AVP

Hi bogdan, We called Load_gw and next-gw from request route. We have no problem with next_gw if the if (avp_pushto("$ruri", "s:fwdnoanswer")) happens in the

route. But when it does in the failure_route the next_gw can't find the ruri_user avp. Raymond Route { .......... Route(3); ........... } failure_route[1] { if (t_check_status("(480)|(408)")) { if (avp_pushto("$ruri", "s:fwdnoanswer")) { avp_delete("s:fwdnoanswer"); route(3); }; }; } Route[3] { if (!load_gws()) { sl_send_reply("500", "Server Internal Error - Cannot load gateways"); return; }; ............... Route(5); } Route[5] { if (!next_gw()) { rewriteuri("sip:userbusy@211.102.91.134:443"); t_relay(); return; }; .............. } -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Wednesday, February 15, 2006 2:25 AM To: Raymond Chen Cc: daniel(a)voice-system.ro; Users(a)openser.org Subject: Re: [Users] next_gw(): No ruri_user AVP Hi Ray, do you call load_gws() from failure route? if so, not that this is not supported. For LCR to work properly, you need to call load_gws() and next_gw() from the request route and later next_gw() from failure routes. regards, bogdan Raymond Chen wrote: >Hi Bogdan, > >Here is the debug > >1(2584) load_gws(): DEBUG: Added gw_uri_avp <sip:@xxx.xxx.xxx.138:5060> >1(2584) load_gws(): DEBUG: Added gw_uri_avp <sip:@xxx.xxx.xxx.139:5060> >1(2584) DEBUG:avpops:print_avp: p=0xf4f167c8, flags=2 >1(2584) DEBUG: id=<1400> >1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.139:5060> >1(2584) DEBUG:avpops:print_avp: p=0xf4f16790, flags=2 >1(2584) DEBUG: id=<1400> >1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.138:5060> >1(2584) does_uri_exit(): User in request uri does not exist >1(2584) is_user_in(): User is in group 'local' >1(2584) db_flags=3, flags=12 >1(2584) DEBUG:avpops:print_avp: p=0xf4f167f8, flags=B >1(2584) DEBUG: id=<1400> >1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.139:5060> >1(2584) DEBUG:avpops:print_avp: p=0xf4f16790, flags=2 >1(2584) DEBUG: id=<1400> >1(2584) DEBUG: val_str=<sip:@xxx.xxx.xxx.xxx:5060> >1(2584) next_gw(): No ruri_user AVP > > > >Raymond > > >-----Original Message----- >From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >Sent: Tuesday, February 14, 2006 10:55 AM >To: Raymond Chen >Cc: daniel(a)voice-system.ro; Users(a)openser.org >Subject: Re: [Users] next_gw(): No ruri_user AVP > >Hi Ray, > >use avp_print() after the load_gw() to see what avps were loaded and >again just before next_gw() to see the available avp. >this will help to see if it's a problem at the load or search part. > >regards, >bogdan > >Raymond Chen wrote: > > > > > >>Hi Daniel, >> >>The problem we have is not about next_gw forward to &gt;&gt;userbusy(a)xxx.xxx.xxx.xxxxx.xxx. We have no problem with load_gw, it loads two >>gateways against ruri_user correctly. but when next_gw called, it saids >> >>next_gw(): No ruri_user AVP >> >>looks like ruri_user avp is not saved when load_gw was called. So