Hello list. Regarding to this issue. These are the results for my "production" machine after upgrade the Python from 2.3 to 2.4.1.
Since Friday the %MEM is 0.5, as the output of the "top" command indicate :
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND 6131 root 15 0 5460 5460 2492 S 9.9 0.5 119:04 0 mediaproxy.py
So, it works!. For the record i'm using :
OS : Red Hat 9.0 Python : 2.4.1 SER: 0.8.14 mediaproxy : 1.2.1
Regards, Ricardo Martinez.-
-----Mensaje original----- De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] Enviado el: Viernes, 08 de Abril de 2005 18:18 Para: 'Lucas Aimaretto'; serusers@lists.iptel.org Asunto: RE: [Serusers] Mediaproxy still consuming a lot of RAM resources.
Regarding to this issue Well, thanks to Lucas, just to test i changed the pyhton version in my "lab" server from python2.3 to pyhton2.4.1. I made the same test with the rtpgenerator and "voila".
Check it out :
Before 80 simultaneus calls :
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 13915 root 15 0 4628 4628 2068 S 1.0 0.9 0:00 mediaproxy.py
During the test :
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 13915 root 25 0 4864 4864 2068 R 99.9 0.9 0:31 mediaproxy.py
After the test :
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 3356 root 15 0 1600 1600 1036 S 0.0 0.3 0:00 bash 13915 root 15 0 4864 4864 2068 S 0.0 0.9 0:44 mediaproxy.py
0.9 % !!!!!
I made the test a couples of times later and the %MEM used is still 0.9%. I guess that it was maybe a problem between the python2.3 and the mediaproxy? Don't know...
I'm going to change the python version in my production machine. i'm going to keep you inform about the results...
Thanks to Lucas...again.
Best Regards,
Ricardo Martinez.-
-----Mensaje original----- De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] Enviado el: Viernes, 08 de Abril de 2005 17:33 Para: 'Lucas Aimaretto'; serusers@lists.iptel.org Asunto: RE: [Serusers] Mediaproxy still consuming a lot of RAM resources.
For example now i have 14 simultaneus calls.
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND 11760 root 15 0 601M 518M 2396 R 7.2
51.469:10 0 mediaproxy.py
When the active calls are 0 again the CPU % reach 0.2%, but the %MEM is greater than 51.4%, and always increasing.. A couple of questions. How you launch mediaproxy?. And in your last mail what are
the pyhton
proccess running.. i don't see the mediaproxy process running. Thanks again.
Ricardo.-
-----Mensaje original----- De: Lucas Aimaretto [mailto:lucas@cyneric.com] Enviado el: Viernes, 08 de Abril de 2005 17:20 Para: 'Ricardo Martinez'; serusers@lists.iptel.org Asunto: RE: [Serusers] Mediaproxy still consuming a lot of RAM resources.
But when you check the use of RAM memory in your machine... (maybe with the command "top" or the command "free") don't you notice a increasing amount of RAM used without being released? As i mentioned i have this problem.. this is a snippet of the output of the "top" command in my machine:
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND 11760 root 15 0 590M 516M 2396 S 0.9
51.268:15 0 mediaproxy.py
51.2% of memory used? What version of pyhton are you using?, what OS are you using?. Thanks!
Hey!, how many calls where you proxying when you had that usage of memmory ?
Regards,
Lucas
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.5 - Release Date:
07/04/2005
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers