OK, because looping was something that should not have happened in
this case.
Then the problem is that you do not do nat-traversal-like processing
for websocket/webrtc traffic. You have to use set_contact_alias() +
handle_ruri_alias() because the webrtc endpoints do not set "valid"
contact addresses.
Cheers,
Daniel
On 07.05.21 14:13, Igor Olhovskiy wrote:
Ah, no, sorry, I was wrong at this one,
This just is not sent with "unable to resolve address
toleivu2gdbh.invalid".
Sorry. Looping were something else during my tests, this just with
*advertise* added
Regards,
Igor
On 07.05.2021 14:02, Daniel-Constantin Mierla wrote:
>
> This looks like incoming ACK, because there is only one Via header,
> so it is not what proxy forwards -- that one is relevant to see what
> headers were consumed and added.
>
> Cheers,
> Daniel
>
> On 07.05.21 13:51, Igor Olhovskiy wrote:
>> Sure.
>>
>> ACK sip:88290@toleivu2gdbh.invalid;transport=wss SIP/2.0
>> Via: SIP/2.0/UDP
>> A_IP_ADDRESS:5060;rport;branch=z9hG4bKPj8d05548a-91ef-4332-8617-32f8eeebf8f2
>> From: <sip:88881@A_IP_ADDRESS>;tag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d
>> To: <sip:88290@KAMAILIO_FQDN>;tag=hvra7mj3q0
>> Call-ID: 46f44741-d155-4dd5-8fd8-78e540fc1acb
>> CSeq: 18326 ACK
>> Route:
>>
<sip:KAMAILIO_FQDN;lr;r2=on;ftag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d;nat=wss>
>> Route:
>>
<sip:KAMAILIO_FQDN:8089;transport=ws;lr;r2=on;ftag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d;nat=wss>
>> Max-Forwards: 70
>> User-Agent: Asterisk PBX 13.33.0
>> Content-Length: 0
>>
>>
>> By loop I meant, Kamailio just relaying it back to self and discard.
>>
>> Regards,
>> Igor
>> On 07.05.2021 13:48, Daniel-Constantin Mierla wrote:
>>>
>>> Can you paste the ACK that loops, after being handled once by
>>> Kamailio?
>>>
>>> Cheers,
>>> Daniel
>>>
>>> On 07.05.21 13:25, Igor Olhovskiy wrote:
>>>>
>>>> Daniel,
>>>>
>>>> Yes, it is.
>>>>
>>>> alias=...
>>>>
>>>> Also tried with
>>>>
>>>> listen = IP advertise FQDN
>>>>
>>>> same behavior, loose_route() stops acting correctly.
>>>>
>>>> PS: Forgot to add, Kamailio 5.4.3 / 5.4.4
>>>>
>>>> Regards,
>>>> Igor
>>>> On 07.05.2021 13:21, Daniel-Constantin Mierla wrote:
>>>>>
>>>>> Hello,
>>>>>
>>>>> is the KAMAILIO_FQDN set as local domain for Kamailio (via alias
>>>>> parameter or domain module+register myself)?
>>>>>
>>>>> Cheers,
>>>>> Daniel
>>>>>
>>>>> On 07.05.21 11:17, Igor Olhovskiy wrote:
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> I saw there are some topics on this already and carefully
>>>>>> walked through all of them, but can't solve following issue.
>>>>>>
>>>>>> For a reason I do need that in Record-Route header sent to
>>>>>> endpoint would present FQDN. If it matters, it's UDP/WSS
>>>>>> conversion done on Kamailio.
>>>>>>
>>>>>> So, scheme is quite simple
>>>>>>
>>>>>> Enpoint A ->UDP-> Kamailio ->WSS-> Endpoint B (NAT)
>>>>>>
>>>>>> Main issue here, that if in Record-Route headers it's FQDN,
but
>>>>>> not IP addresses, on a new transactions with a dialog (ACK on
>>>>>> 200, PRACK, BYE), Kamailio*loose_route()* function resolves
>>>>>> address of destination not current dialog, but actual R-URI (or
>>>>>> itself, if R-URI is something from WebRTC world) that is not
>>>>>> correct due to NAT.
>>>>>>
>>>>>> If in RR headers IP addresses are present - all is working as
>>>>>> expected.
>>>>>>
>>>>>> As an example (RR with FQDN)
>>>>>>
>>>>>> B answers 200
>>>>>>
>>>>>> SIP/2.0 200 OK
>>>>>> Record-Route:
>>>>>>
<sip:KAMAILIO_FQDN:8089;transport=ws;r2=on;lr=on;ftag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d;nat=wss>
>>>>>> Record-Route:
>>>>>>
<sip:KAMAILIO_FQDN;r2=on;lr=on;ftag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d;nat=wss>
>>>>>> Via: SIP/2.0/UDP <A_IP_ADDRESS>:5060;received=A IP
>>>>>>
ADDRESS;rport=5060;branch=z9hG4bKPj67fb6d86-97d7-4231-995b-e54b0f62881e
>>>>>> To: <sip:88290@<KAMAILIO_FQDN>>;tag=hvra7mj3q0
>>>>>> From:
>>>>>>
<sip:+XXXX7688881@<KAMAILIO_FQDN>>;tag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d
>>>>>> Call-ID: 46f44741-d155-4dd5-8fd8-78e540fc1acb
>>>>>> CSeq: 18326 INVITE
>>>>>> Contact: <sip:88290@toleivu2gdbh.invalid;transport=wss>
>>>>>> Allow: ACK,CANCEL,INVITE,MESSAGE,BYE,OPTIONS,INFO,NOTIFY,REFER
>>>>>> Supported: outbound
>>>>>> Content-Type: application/sdp
>>>>>> Content-Length: 817
>>>>>>
>>>>>>
>>>>>> ACK looks like
>>>>>>
>>>>>> ACK sip:88290@toleivu2gdbh.invalid;transport=wss SIP/2.0
>>>>>> Via: SIP/2.0/UDP
>>>>>>
A_IP_ADDRESS:5060;rport;branch=z9hG4bKPj8d05548a-91ef-4332-8617-32f8eeebf8f2
>>>>>> From:
>>>>>>
<sip:88881@A_IP_ADDRESS>;tag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d
>>>>>> To: <sip:88290@KAMAILIO_FQDN>;tag=hvra7mj3q0
>>>>>> Call-ID: 46f44741-d155-4dd5-8fd8-78e540fc1acb
>>>>>> CSeq: 18326 ACK
>>>>>> Route:
>>>>>>
<sip:FQDN;lr;r2=on;ftag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d;nat=wss>
>>>>>> Route:
>>>>>>
<sip:FQDN:8089;transport=ws;lr;r2=on;ftag=0a3e31a6-96ad-42d0-9310-81b35cedbd3d;nat=wss>
>>>>>> Max-Forwards: 70
>>>>>> User-Agent: Asterisk PBX 13.33.0
>>>>>> Content-Length: 0
>>>>>>
>>>>>> And Kamailio on *loose_route()* loops ACK to itself. (with
>>>>>> result of function == 1)
>>>>>>
>>>>>> In a case if in Record-Route/Route headers just IP address of
>>>>>> Kamailio present, all works as expected, but it's not really
>>>>>> behavior I want to achieve.
>>>>>>
>>>>>> I've tried to play with
*record_route_preset("...")* specifying
>>>>>> only WSS part (as suggested in
>>>>>>
https://skalatan.de/de/blog/kamailio-sbc-teams) with FQDN, but
>>>>>> no luck.
>>>>>>
>>>>>> Also wanted to try approach using record_route_preset()
>>>>>> function in branch route, but it was working only with first
>>>>>> branch, not affecting others (but I assume having different RR
>>>>>> headers across branches is not a good idea)
>>>>>>
>>>>>> --
>>>>>> Regards,
>>>>>> Igor
>>>>>>
>>>>>> __________________________________________________________
>>>>>> Kamailio - Users Mailing List - Non Commercial Discussions
>>>>>> *sr-users(a)lists.kamailio.org
>>>>>> Important: keep the mailing list in the recipients, do not reply
only to the sender!
>>>>>> Edit mailing list options or unsubscribe:
>>>>>> *https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>> --
>>>>> Daniel-Constantin Mierla --www.asipto.com
>>>>>
www.twitter.com/miconda --www.linkedin.com/in/miconda
>>>>> Kamailio Advanced Training - Online
>>>>> May 17-20, 2021 (Europe Timezone) - June 7-10, 2021 (America
Timezone)
>>>>> *https://www.asipto.com/sw/kamailio-advanced-training-online/
>>>>
>>>> __________________________________________________________
>>>> Kamailio - Users Mailing List - Non Commercial Discussions
>>>> *sr-users(a)lists.kamailio.org
>>>> Important: keep the mailing list in the recipients, do not reply only to
the sender!
>>>> Edit mailing list options or unsubscribe:
>>>> *https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>> --
>>> Daniel-Constantin Mierla --www.asipto.com
>>>
www.twitter.com/miconda --www.linkedin.com/in/miconda
>>> Kamailio Advanced Training - Online
>>> May 17-20, 2021 (Europe Timezone) - June 7-10, 2021 (America Timezone)
>>> *https://www.asipto.com/sw/kamailio-advanced-training-online/
> --
> Daniel-Constantin Mierla --www.asipto.com
>
www.twitter.com/miconda --www.linkedin.com/in/miconda
> Kamailio Advanced Training - Online
> May 17-20, 2021 (Europe Timezone) - June 7-10, 2021 (America Timezone)
> *https://www.asipto.com/sw/kamailio-advanced-training-online/
--www.linkedin.com/in/miconda
Kamailio Advanced Training - Online
May 17-20, 2021 (Europe Timezone) - June 7-10, 2021 (America Timezone)
*https://www.asipto.com/sw/kamailio-advanced-training-online/