RE: [Serusers] ERROR: bad config file (1 errors)

hi olivier, in fact I have downloaded ser-0.9.6_linux_i386.tar.tar from iptel.org. then I have put the ser-0.9.6_linux_i386.tar.tar file in root(/) directory and executed following command [root@oracle2 /]# tar -xvzf ser-0.9.6_linux_i386.tar.tar do still need to recompile it ? .....I think complation had to be done in case I had the source code. regards Mukesh _____ From: olivier.taylor [mailto:olivier.taylor@gmail.com] Sent: Friday, June 23, 2006 3:16 PM To: mukesh Cc: olivier.taylor(a)phonext.com; serusers(a)lists.iptel.org Subject: Re: [Serusers] ERROR: bad config file (1 errors) it seems that you didn't compile ser with mysql support. go to the makefile et have a look at exclude_modules?= delete the mysql entry and recompile Olivier mukesh a écrit : hi olivier, below is the log -----------------------------------log starts here-------------------------------------------- Jun 23 14:51:48 oracle2 ser: ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.12: cannot open shared object file: No such file or directory Jun 23 14:51:48 oracle2 ser: parse error (37,13-14): failed to load module -----------------------------------log ends here-------------------------------------------- and line no. 37 is loadmodule "/usr/local/lib/ser/modules/mysql.so" please suggest some solution. regards Mukesh _____ From: olivier.taylor [mailto:olivier.taylor@gmail.com] Sent: Friday, June 23, 2006 12:45 PM To: mukesh Cc: olivier.taylor(a)phonext.com; serusers(a)lists.iptel.org Subject: Re: [Serusers] ERROR: bad config file (1 errors) yes, sure :) /var/log/messages you will find the informations you need concerning that error, at least, the line of your cfg where the error occurs. Olivier mukesh a écrit : Thanks you olivier. Can you be little more specific, where this message file is located ? Regards Mukesh -----Original Message----- From: olivier.taylor [mailto:olivier.taylor@gmail.com] Sent: Thursday, June 22, 2006 9:55 PM To: mukesh Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] ERROR: bad config file (1 errors) see the message file, you will find there the line wich is not correct on your ser.cfg Olivier mukesh a écrit : Hi I am getting "ERROR: bad config file (1 errors)" while truing to execute the SER. And I could not figure out whats wrong with this line loadmodule "/usr/local/lib/ser/modules/mysql.so" If I comment it then everything is file. Following is my ser.cfg file ---------------------------------ser.cfg star------------------------------ # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) listen=192.87.41.149 #this address has been changed # hostname matching an alias will satisfy the condition uri==myself". alias=sip.myserver.com /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ #check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" #added by mukesh # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #added by mukesh modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sip.myserver.com", "subscriber")) { www_challenge("ser.hungama.com", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } ---------------------------------ser.cfg ends------------------------------ Any help/suggestion is highly appreciated. Regards Mukesh _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _____ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers