2 Feb
2017
2 Feb
'17
10:11 a.m.
Hi,
I have the same experience with enabling end disabling rtpengines using
commands like kamctl fifo nh_enable_rtpp udp:xyz.
I tested in on kamailio 4.4.3
Currently I have my rtpengines' IPs in MySQL table. Here I can disable
or enable them. After changing parameters in rtpengine's table, I just
need to reload it using kamctl fifo nh_reload_rtpp
so I use only :
kamctl fifo nh_show_rtpp all - for showing active rtpengines
kamctl fifo nh_reload_rtpp - for reloading my configuration
this works reliably
BR,
Jan
Hi All.
I ave just try to temporary disable 1 of 2 RTPEngines.
It was disabled successfully all media dialogs was finished.
But when I have try to enable it I have kamailio crashed with error:
CRITICAL: <core> [pass_fd.c:277]: receive_fd(): EOF on 121
Does anyone have such issue?
kamailio 4.4.5 on RHEL 7.2 x86_64
rtpengine 4.4.0 on RHEL 7.2 x86_64
# kamctl fifo nh_show_rtpp all
which: no gdb in
(/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/)
udp:10.1.23.24:2223:: set=0
index:: 0
disabled:: 0
weight:: 1
recheck_ticks:: 0
udp:10.1.23.25:2223:: set=0
index:: 1
disabled:: 0
weight:: 1
recheck_ticks:: 0
after
# kamctl fifo nh_enable_rtpp udp:10.1.23.25:2223 0
it was successfully disabled with media going on
after
# kamctl fifo nh_enable_rtpp udp:10.1.23.25:2223 1
I got kamailio crash with error
CRITICAL: <core> [pass_fd.c:277]: receive_fd(): EOF on 121
sorry I does not have coredump, it is production system.
my config regarding rtpengine:
modparam("rtpengine", "rtpengine_allow_op", 1)
modparam("rtpengine", "rtpengine_sock", "udp:10.1.23.24:2223
udp:10.1.23.25:2223")
Thank you.
--
Best regards,
Sergey Basov e-mail: sergey.v.basov(a)gmail.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users