You say you've seen packets on kamailio but kamailio isn't replying !!
1- Please verify that yuor kamailio is indeed started [ps -ef | grep kamailio]
2- Verify if kamailio is actuallay listening on the same port as you are sending pcakets to ! [netstat -pln|grep kamailio]
3- Verify if your kamailio is using the same protocol as of your client i.e TCP or UDP or TLS etc.
4- instead of viewing the file /var/log/kamailio see /var/log/messages because you haven't mentioned local7 as Log facility in your config.
I don't see your syslog.conf file in this mail! check that file and follow the referenced link completely.
Also see your configurations kamailio.cfg file and use define tags from second line from top onward i.e just after #!KAMAILIO.
Try getting rid of the comment line "####### Defined Values #########" - in my experience such comment before define cause trouble with configurations.
See all these and then reply with updates.
Regards,
Sammy G.
On Tue, May 29, 2012 at 2:18 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
Hello,
you can set debug=3 in kamailio config to see very verbose debug
messages. If you don't get any, means the request does not reach the
application layer, meaning you have a firewall in place that drops
the packets from the network.
Cheers,
Daniel
On 5/29/12 8:02 AM, Faisal Yousuf
wrote:
Hi Experts,
I am a newbee with SIP-Router/Kamailio - I installed Kamailio
on a CentOS 5.5 VM - following the instructions from the
following link
Kamailio is installed & I can start kamailio deamon from
service kamailio start
However I also created two subscribers - but when I try to
register my SIP Phone (by setting Kamailio as the domain to
register to) - I can see my sip-phone sending the Register
request to Kamailio (I put a tcpdump on the kamailio machine to
see sip-messages reaching the host) but I dont get any response
from Kamailio - so my sip phone reaches the 408 Registeration
Timeout state.
Now, I dont get any logs from Kamailio to know what is
happening while my phone is sending the register request - I
tried to configure logging following instructions from the
following link
But I dont get any logs in the /var/log/kamailio log file.
To assist in understanding the issue - I am attaching the
syslog config , kamailio config file & the kamailio service
script in the init.d folder.
My first objective will be to enable logging for kamailio
& the next objective is to get the basic registration &
routing between endpoints - my ultimate objective is to
configure SER/Kamailio as a load-balancer for our B2BUA &
Media Servers (I found the dispatcher module can help in
accomplishing this) - Can anybody help me in identifying why I
am not getting any logs ?
I have already seen the wiki & have developed some
understanding regarding how Kamailio is configured but am I
seeking more information regarding the route language - (the
state-model + reference of the functions that can be used in the
route script etc.) - in this regards if I can get any
documentation pointers from the user community that can help me
gain a better understanding the use of Kamailio for above it
will be great