Hello, I think I tried everything to get asterisk let registration be allowed. I set insecure=port,invite on the main trunk from kamailio, for every friend (every user) which register is forwarded..Asterisk keeps sending 401 Unauthorized. Is there any trick about it?
On Wed, Oct 13, 2010 at 1:59 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
in Asterisk you have to accept SIP traffic coming from kamailio without authentication (e.g., based on source ip/port).
Cheers, Daniel
On 10/13/10 1:38 PM, Borin wrote:
Is kamailio supposed to send WWW-Authenticate header back to asterisk after it gets SIP/2.0 401 Unauthorized? kamailio authenticates user , sends REGISTER to asterisk, after getting "Unauthorized" sends another REGISTER with the same headers and, as the second REGISTER does not contain WWW-Authenticate: Digest algorithm=MD5, realm="blabla", nonce="56c213f9", Asterisk does not register this user.
On Wed, Oct 13, 2010 at 11:25 AM, Borin katerin.borin@gmail.com wrote:
Thanks a lot for a link. before was: listen=udp:IP:port I changed it to listen=udp:IP port=5070
Now works
On Wed, Oct 13, 2010 at 10:50 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
what is the configuration line before (not the comments)?
If it is alias or listen, then there is a conflict in the grammar, not very trivial to fix:
http://sip-router.org/tracker/index.php?do=details&task_id=56&projec...
Cheers, Daniel
On 10/13/10 10:44 AM, Borin wrote:
hello again sorry for stupid question, but I can't get this definition working. I have ver 3.1 of kamailio, the definitions don't work as it described in the manual.
asterisk.bindip = "asterisk.ip" desc "Asterisk IP Address" asterisk.bindport = "5080" desc "Asterisk Port" kamailio.bindip = "kamailio.ip" desc "Kamailio IP Address" kamailio.bindport = "5060" desc "Kamailio Port" kamailio (ver 3.1 ) sais after restart I have syntax error Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3412]: yyerror_at(): parse error in config file /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 17: syntax error
Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3412]: yyerror_at(): parse error in config file /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 17: unknown config variable Oct 13 08:40:13 voip-test kamailio: : <core> [cfg.y:3409]: yyerror_at(): parse error in config file /usr/local/kamailio-3.1/etc/kamailio-pbx/kamailio.cfg, line 43, column 19-33:
On Wed, Oct 13, 2010 at 8:59 AM, Borin katerin.borin@gmail.com wrote:
Thanks, Lucas. That is exactly what I was looking for
On Tue, Oct 12, 2010 at 5:47 PM, Lucas Alvarez lucasaa@gmail.comwrote:
Hello, here is How-To written by Daniel-Constantin Mierla of a Kamailio-Asterisk integration: http://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb, check the .cfg file posted there. Actually I followed up that tutorial and I have the extensions registered both on Asterisk and Kamailio. I hope this can be useful. Regards.
Lucas
On Tue, Oct 12, 2010 at 1:34 PM, Borin katerin.borin@gmail.comwrote:
Hello, I am not good at kamailio. Could anyone tell me how can I forward register messages coming to kamailio to asterisk? I need users to be registered on kamailio and on asterisk at one time. I do in kamailio.cfg: if (is_method("REGISTER")) { save("location"); route(FWD_REG); exit;
}route[FWD_REG] { rewritehost("Asterisk_IP:5060"); if(!t_relay()) sl_reply_error();
exit;}
But it (kamailio ver 3.1) does not forward them.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://www.asipto.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://www.asipto.com