17 Feb
2023
17 Feb
'23
3:15 p.m.
Well, if you don't know the ip:port of the pbx and the pbx does not
register ... but you should know something about the PBX, how do you
send traffic to it and how do you trust the traffic from it?
On 17.02.23 12:39, Bernd Krueger-Knauber wrote:
Hi,
I don't think that your ideas are possible.
I need to send the keepalive to the PBX on the same ip:port connection
which is in use.
If I add something static, this will not work.
Am 17.02.2023 um 12:19 schrieb Daniel-Constantin Mierla:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - June 5-7, 2023 - www.kamailioworld.com
Kamailio Advanced Training - Online - March 27-30, 2023 - www.asipto.com
On 17.02.23 11:44, Bernd Krueger-Knauber wrote:
--
EDNT GmbH
Werner-von-Siemens-Strasse 7
64625 Bensheim
www.ednt.de
Registergericht: Darmstadt
Registernummer: 24972
Geschäftsführer: Karlheinz Knapp
Ok, one step further.
I need to use save() to add the phone as 'contact' when I get a
REGISTER
I get now keepalive packets to the phone, but ...
I need them also to the PBX.
I can not add the PBX as contact, because it does not register.
I think there is no possibilty to add a manual entry in the usrloc
memory.
How can I also send the keepalive packets to the PBX?
Interconnect with a SIP system that does not register is usually done
with dispatcher module, which can send keepalives as well. Or if you
want to do with static rule in kamailio.cfg, look at keepalive module,
maybe you can build the solution you need.
Adding a manual entry in the usrloc is possibe via rpc or directly to db
table (for db only mode).
Cheers,
Daniel