3 Jul
2008
3 Jul
'08
4:35 p.m.
Hello Mayamatakeshi,
The error is from snmpget. It is basically saying that it doesn't know
how to translate the openserSIPEntityType into a numerical OID. There
are two possibilities for this error.
Firstly, have you copied the MIB files (OPENSER-MIB, OPENSER-REG-MIB,
OPENSER-SIP-COMMON-MIB, OPENSER-SIP-SERVER-MIB) to the same location as
NetSNMP's other MIB files? They are usually located in
/usr/local/share/snmp/mibs or /usr/share/snmp/mibs. You can find which
directory your system is using with "locate SNMPv2-TC.txt". Also, make
sure your snmp.conf (not the snmpd.conf) file contains:
mibs +ALL
This instructs the snmp command line utilities (snmpget, snmpwalk,
etc.), to load all MIB files before trying to convert between
openserSIPEntityType and its numerical OID equivalent.
Let me know if that works!
- Jeffrey Magder
mayamatakeshi wrote:
It seems the doc page has an error.
It says to set this at snmpstats.conf:
agentXSocket tcp:localhost:705
And this when starting snmpd:
snmpd -f -Dagentx -x localhost:705 2>&1 | less
This will not work because snmpd will use udp by default.
So I added 'tcp:' before 'localhost' and after that, I could see some
messages like this:
agentx/master: handle pdu (req=0x68ab0cd4,trans=0x0,sess=0x7)
agentx/master: send response, stat 0 (req=0x68ab0cd4,trans=0x0,sess=0x7)
agentx_build: packet built okay
But after that, I'm still not able to get anything with snmpget:
snmpget -v2c -c public tcp:localhost:705 openserSIPEntityType.0
snmpget: Session abort failure (Sub-id not found: (top) ->
openserSIPEntityType)
On Thu, Jul 3, 2008 at 6:15 PM, mayamatakeshi <mayamatakeshi(a)gmail.com
<mailto:mayamatakeshi@gmail.com>> wrote:
Hello,
I'm trying to test with snmpstats following instruction from
http://www.openser.org/docs/modules/1.3.x/snmpstats.html
From snmpd output, I can see openser is connecting to it, but i
don't see openser uploading any info (I'm running "snmpd -f
-Dagentx -x localhost:705 2>&1 | less"). Then, when I try to get
any openser info using snmpget or snmpwalk, nothing shows up.
Maybe I am missing something (I confirmed snmpd finds and loads
openser MIBs).
Regards,
takeshi
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users