On 2/8/07, TZieleniewski <tzieleniewski@o2.pl> wrote:

it apeared that the problem was in the radius server
in the latest cvs of radius is patch which fixes the problem

Best
tomasz
tzieleniewski napisał(a):
> Hi!
>
> I am trying to use radius as the accounting server for SER. I am using the latest cvs version of ottendorf.
> After I send the Accounting request to radius the radius server brokes down and informs about memory segmentation fault. Maybe someone dealed with this problem and can point me what could be the reason for this.
> Here is the radius debug output:
>
> rad_recv: Accounting-Request packet from host 127.0.0.1 port 32825, id=88, length=463
>         SER-Attr = ""
>         Acct-Session-Id = " 69E969D9-A757-D5D1-477F-77FEF8DAA44D@192.168.1.2"
>         Sip-To-Tag = "795669631"
>         SER-From = "tomix < sip:tomix@tezet.no-ip.org:7060>;tag=795669631"
>         SER-Flags = 12
>         SER-Original-Request-ID = "sip:tomix@tezet.no-ip.org"
>         Sip-Method = "INVITE"
>         Sip-Cseq = 51319
>         Sip-Translated-Request-ID = "sip:tomix@192.168.1.2:7060"
>         Sip-Source-IP-Address = 192.168.1.2
>         Sip-From-Tag = "795669631"
>         SER-To = "<sip:tomix@tezet.no-ip.org>;tag=795669631"
>         SER-Digest-Username = "tomix"
>         SER-Request-Timestamp = 1170882487
>         Calling-Station-Id = "sip:tomix@tezet.no-ip.org:7060"
>         Sip-Source-Port = 7060
>         SER-Digest-Realm = " tezet.no-ip.org"
>         Sip-Response-Code = 486
>         Called-Station-Id = "sip:tomix@tezet.no-ip.org"
>         SER-Response-Timestamp = 1170882487
>         Acct-Status-Type = Failed
>         Service-Type = IAPP-Register
>         NAS-Port = 5060
>         Acct-Delay-Time = 0
>         NAS-IP-Address = 127.0.0.1
>   Processing the preacct section of radiusd.conf
> modcall:  entering group preacct for request 1
> Naruszenie ochrony pamięci (translation -> memory segmentation fault)
>
> (when I commented out the preprocess module form the preacct it didn't broke down but still nothig was logged in the database)
> My radiusd.conf file look like this:
>
> preprocess {
>          huntgroups = ${confdir}/huntgroups
>          hints = ${confdir}/hints
>          with_ascend_hack = no
>          ascend_channels_per_line = 23
>          with_ntdomain_hack = no
>          with_specialix_jetstream_hack = no
>          with_cisco_vsa_hack = no
> }
>
> preacct {
>         preprocess
>         acct_unique
>         suffix
>         files
> }
>
> accounting {
>         acc_req_log
>         radutmp
>         sql
>         attr_filter.accounting_response
> }
>
>
>
> _______________________________________________
> Serusers mailing list
> Serusers@lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
>

_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers