Adrian,

I have noticed when upgrading from old 5.3.2 to 6.4.1

Bellow are the helps from both versions (notice ShowPrice command):


version
CDRTool version 5.3.2

help
Version
Help
ShowAccounts
MaxSessionTime From=sip:123@example.com To=sip:0031650222333 Duration=7200 Lock=1
DebitBalance   From=sip:123@example.com To=sip:0031650222333 Duration=59
ShowPrice      From=sip:123@example.com To=sip:0031650222333 Duration=59
AddBalance     From=sip:123@example.com Value=10.00
GetBalance     From=sip:123@example.com
ReloadRatingTables
ReloadCustomers Customer=123@example.com Type=[Subscriber|Domain|Gateway]
ShowCustomers Filter=123@example.com
ShowRates
ShowProfiles
ShowENUMtlds
ReloadPrepaidAccounts Account=abc@example.com
ShowPrepaidAccounts Filter=123@example.com
ShowMemory
ReloadSipAccountsWithQuota
ReloadDomains


version
CDRTool version 6.4.1

help
Version
Help
MaxSessionTime        From=sip:123@example.com To=sip:0031650222333@example.com Duration=7200 Lock=1
ShowPrice             From=sip:123@example.com To=sip:0031650222333@example.com DestinationId=31650 Duration=59
AddBalance            From=123@example.com Value=10.00
GetBalance            From=123@example.com
GetBalanceHistory     From=123@example.com
DeleteBalance         From=123@example.com
DeleteBalanceHistory  From=123@example.com
DebitBalance          From=sip:123@example.com To=sip:0031650222333@example.com Duration=59
ShowPrepaidAccounts   Filter=123@example.com
ReloadPrepaidAccounts Account=abc@example.com
ReloadQuota           Account=abc@example.com
GetEntityProfiles     Entity=abc@example.com
ReloadRatingTables
ReloadDomains
ShowAccounts
ShowProfiles
ShowENUMtlds
ShowMemory

Ta,
DanB

On Wed, May 28, 2008 at 5:48 PM, Adrian Georgescu <ag@ag-projects.com> wrote:
Dan

I have no changed anything related to this. Usually I write in the changelog about such dramatic changes.

What did you notice and between which versions?

Adrian



>>>>>>>>>
I have noticed that recently ShowPrice behavior has changed, and since did
not find it in Changelog I decided to try my shoot over here .
There  are no more queries based on destination number but DestinationId.
Was the support for destination number lost for good, or only temporarily?
If that was done, why is "To=" parameter still mandatory? The presence or
absence of it does not make any different in queries, as far as I can see.

My version:
version
CDRTool version 6.4.1

Ta,
DanB


_______________________________________________
Users mailing list
Users@lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users