Hello Danel,
Thank you for your response,

Well i don't have SELinux enabled and IPTables isn't running.

About kamailio configuration, Pike module isn't also enabled, the only thing that i have enabled to limit the number of concurrent calls  is the dialog module, counting the number of active dialogs and reject next new invites only  after it has reached the 10.000 simultaneous calls.

The strange behavior is that kamailio only stop processing some sip messages like Byes and 200 Ok after more or less 40 seconds after siptester start sending calls.

And i can see several cases in wireshark that kamailio receives BYES/200OK from interface B(Carriers interface) but it isn't forward to Interface A(customer interface), if i make for example 20cps i don't have this issue, all packets are handled correctly and there isn't 408 requests timeouts.


Best Regards
José Seabra

 

2015-09-27 13:52 GMT+01:00 Daniel-Constantin Mierla <miconda@gmail.com>:
The tmp variable is not intialized by default, so it can be anything therefore the out of bounds value. It used only when printing some errors, so it didn't get a proper value as no such error was printed for you case.

The backtrace shows the process in in recvfrom(), so it waits for traffic from network. That is the case when the processing of former sip message was finished and now Kamailio waits to receive another one.

If you run centos, be sure you don't have limits in selinux rules - better disable it completely and test again. Also, be sure you don't have limits in the firewall, especially contrack module and sip firewall modules in the kernel.

In kamailio.cfg, if you have pike module, be sure you don't drop good packet with this module.

Cheers,
Daniel


On 25/09/15 19:53, José Seabra wrote:
Adding more information to my last email, when kamailio starts receiving calls, after more or less 40 seconds it stops processing some sip messages.

I'm using the kamailio version 4.3.2

Best Regards


2015-09-25 18:34 GMT+01:00 José Seabra <joseseabra4@gmail.com>:
I have one kamailio server listening in 2 network interfaces, kamailio receives sip messages from interface A and then send it to destine through interface B.
When we start kamailio service then  run gdb for each kamailio network interface process, execute the command "bt full" the result is the following:

tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds>


interface - A

 bt full
#0  0x00007fb01bfa40c3 in recvfrom () from /lib64/libc.so.6
No symbol table info available.
#1  0x000000000047f2ba in udp_rcv_loop () at udp_server.c:421
        len = 13
        buf = '\000' <repeats 65535 times>
        tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds>
        from = 0x7faf9bf38bb8
        fromlen = 16
        ri = {src_ip = {af = 2309178400, len = 32765, u = {addrl = {5458819, 4284160}, addr32 = {5458819, 0, 4284160, 0}, addr16 = {19331, 83, 0, 0, 24320, 65, 0, 0}, 
              addr = "\203KS\000\000\000\000\000\000_A\000\000\000\000"}}, dst_ip = {af = 2, len = 4, u = {addrl = {80026686, 0}, addr32 = {80026686, 0, 0, 0}, 
              addr16 = {7230, 1221, 0, 0, 0, 0, 0, 0}, addr = ">\034\305\004", '\000' <repeats 11 times>}}, src_port = 55576, dst_port = 5060, proto_reserved1 = 0, 
          proto_reserved2 = 0, src_su = {s = {sa_family = 32687, sa_data = "\000\000\200D\243\211\375\177\000\000\213\337D"}, sin = {sin_family = 32687, sin_port = 0, 
              sin_addr = {s_addr = 2309178496}, sin_zero = "\375\177\000\000\213\337D"}, sin6 = {sin6_family = 32687, sin6_port = 0, sin6_flowinfo = 2309178496, 
              sin6_addr = {__in6_u = {__u6_addr8 = "\375\177\000\000\213\337D\000\000\000\000\000p", <incomplete sequence \372\233>, __u6_addr16 = {32765, 0, 57227, 
                    68, 0, 0, 21616, 39930}, __u6_addr32 = {32765, 4513675, 0, 2616874096}}}, sin6_scope_id = 32687}}, bind_address = 0x7faf9becd7d8, proto = 1 '\001'}
        __FUNCTION__ = "udp_rcv_loop"
#2  0x0000000000525eae in main_loop () at main.c:1573
        i = 0
        pid = 0
        si = 0x7faf9becd7d8
        si_desc = "udp receiver child=0 sock=62.28.197.4:5060\000\000\000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000"
---Type <return> to continue, or q <return> to quit---
        nrprocs = 32
        __FUNCTION__ = "main_loop"
#3  0x000000000052c395 in main (argc=11, argv=0x7ffd89a34848) at main.c:2533
        cfg_stream = 0x2296010
        c = -1
        r = 0
        tmp = 0x7ffd89a35f61 ""
        tmp_len = 0
        port = 0
        proto = 32688
        options = 0x725010 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"
        ret = -1
        seed = 1641321572
        rfd = 4
        debug_save = 0
        debug_flag = 0
        dont_fork_cnt = 0
        n_lst = 0x7ffd89a34710
        p = 0x7fb01bf4c646 <intel_check_word+166> "H\205\300t\025\017\266P\003\017\266\312D9\371\017\204", <incomplete sequence \305>
        __FUNCTION__ = "main"



interface B
bt full
#0  0x00007fb01bfa40c3 in recvfrom () from /lib64/libc.so.6
No symbol table info available.
#1  0x000000000047f2ba in udp_rcv_loop () at udp_server.c:421
        len = 45

        buf = '\000' <repeats 65535 times>
        tmp = 0x13cb2f24296000e9 <Address 0x13cb2f24296000e9 out of bounds>
        from = 0x7faf9bf38bb8
        fromlen = 16
        ri = {src_ip = {af = 2309178400, len = 32765, u = {addrl = {5458819, 4284160}, addr32 = {5458819, 0, 4284160, 0}, addr16 = {19331, 83, 0, 0, 24320, 65, 0, 0}, addr = "\203KS\000\000\000\000\000\000_A\000\000\000\000"}}, 
          dst_ip = {af = 2, len = 4, u = {addrl = {2764381246, 0}, addr32 = {2764381246, 0, 0, 0}, addr16 = {7230, 42181, 0, 0, 0, 0, 0, 0}, addr = ">\034Ť", '\000' <repeats 11 times>}}, src_port = 56136, dst_port = 5060, 
          proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = 32687, sa_data = "\000\000\200D\243\211\375\177\000\000\213\337D"}, sin = {sin_family = 32687, sin_port = 0, sin_addr = {s_addr = 2309178496}, 
              sin_zero = "\375\177\000\000\213\337D"}, sin6 = {sin6_family = 32687, sin6_port = 0, sin6_flowinfo = 2309178496, sin6_addr = {__in6_u = {
                  __u6_addr8 = "\375\177\000\000\213\337D\000\000\000\000\000p", <incomplete sequence \372\233>, __u6_addr16 = {32765, 0, 57227, 68, 0, 0, 21616, 39930}, __u6_addr32 = {32765, 4513675, 0, 2616874096}}}, 
              sin6_scope_id = 32687}}, bind_address = 0x7faf9becda08, proto = 1 '\001'}
        __FUNCTION__ = "udp_rcv_loop"
#2  0x0000000000525eae in main_loop () at main.c:1573
---Type <return> to continue, or q <return> to quit---
        i = 0
        pid = 0
        si = 0x7faf9becda08
        si_desc = "udp receiver child=0 sock=62.28.197.164:5060\000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000"
        nrprocs = 32
        __FUNCTION__ = "main_loop"
#3  0x000000000052c395 in main (argc=11, argv=0x7ffd89a34848) at main.c:2533
        cfg_stream = 0x2296010
        c = -1
        r = 0
        tmp = 0x7ffd89a35f61 ""
        tmp_len = 0
        port = 0
        proto = 32688
        options = 0x725010 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"
---Type <return> to continue, or q <return> to quit---
        ret = -1
        seed = 1641321572
        rfd = 4
        debug_save = 0
        debug_flag = 0
        dont_fork_cnt = 0
        n_lst = 0x7ffd89a34710
        p = 0x7fb01bf4c646 <intel_check_word+166> "H\205\300t\025\017\266P\003\017\266\312D9\371\017\204", <incomplete sequence \305>
        __FUNCTION__ = "main"




[root@c4-srv1 kamailio]# kamctl stats shmem
shmem:fragments = 2552
shmem:free_size = 2082764040
shmem:max_used_size = 66449600
shmem:real_used_size = 64719608
shmem:total_size = 2147483648
shmem:used_size = 54355992

Can anyone explain the meaning of 
tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds>

Best Regards
José Seabra




--
Cumprimentos
José Seabra


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - http://asipto.com/u/kat

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




--
Cumprimentos
José Seabra