[Serusers] Re: SERWEB+SER

If I dont rember TOO wrong, I think there is a option you have forgot'n in the Makefile for the acc.module that says if it uses a database or not. - Atle * gaillac harry &lt;gaillacharry(a)yahoo.fr&gt; [040422 16:29]: > Here is my ser.cfg.SER don't start because of acc module > anybody could help me to solved this problem before an other ? > > ser -c => > 0(6238) set_mod_param_regex: parameter <db_url> not found in module > <acc> > 0(6238) parse error (96,60-61): Can't set module parameter > 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in > module <acc> > 0(6238) parse error (97,36-37): Can't set module parameter > 0(6238) parse error (195,63-64): unknown command, missing loadmodule? > > ERROR: bad config file (3 errors) > > regards > > > # > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > #fork=yes > #log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > debug=9 > fork=yes > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > listen=192.168.0.1 > children=4 > fifo="/tmp/ser_fifo" > fifo_mode=0666 > #alias="example.com" > # ------------------ module:wq loading > ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/lib/ser/modules/mysql.so" > > loadmodule "/usr/lib/ser/modules/sl.so" > loadmodule "/usr/lib/ser/modules/tm.so" > loadmodule "/usr/lib/ser/modules/rr.so" > loadmodule "/usr/lib/ser/modules/maxfwd.so" > loadmodule "/usr/lib/ser/modules/domain.so" > loadmodule "/usr/lib/ser/modules/usrloc.so" > loadmodule "/usr/lib/ser/modules/registrar.so" > loadmodule "/usr/lib/ser/modules/msilo.so" > loadmodule "/usr/lib/ser/modules/vm.so" > loadmodule "/usr/lib/ser/modules/acc.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > loadmodule "/usr/lib/ser/modules/auth.so" > loadmodule "/usr/lib/ser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > #modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > modparam("usrloc", "db_mode", 1) > #modparam("usrloc", "use_domain", 1) > > # --register params-- > modparam("registrar", "use_domain", 1) > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in this > config), > # uncomment also the following parameter) > # > modparam("auth_db", "password_column", "password") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # --domain module-- > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") > modparam("domain", "db_mode", 1) > modparam("domain", "domain_table", "domain") > modparam("domain", "domain_col", "domain") > > # --msilo params-- > modparam("msilo", "registrar", "sip:registrar@example.com") > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") > > # --vm params-- > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") > > # --acc params-- > modparam("acc", "log_level", 1) > modparam("acc", "log_flag", 2) > modparam("acc", "log_missed_flag", 2) > modparam("acc", "log_fmt", "fimos") > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > modparam("acc", "db_missed_flag", 2) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (is_from_local()) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("", "subscriber")) { > www_challenge("", "0"); > break; > }; > > save("location"); > m_dump(); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > lookup("aliases"); > if (!lookup("location")) { > > if (method == "MESSAGE") { > if (!t_newtran()) { > sl_reply_error(); > break; > }; > > if (m_store("0")) { > t_reply("202", "Accepted for Later Delivery"); > break; > }; > > t_reply("503", "Service Unavailable"); > break; > }; > }; > > if ((method=="INVITE" || method=="ACK") && t_newtran() ) { > t_reply("404", "Not Found"); > route(3); > break; > }; > > }; > > setflag(2); > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > t_on_failure("1"); > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > > } > > > route[3] { > > # non-Voip -- just send "off-line" > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { > sl_send_reply("404", "Not Found"); > break; > }; > if (t_newtran()) { > t_reply("404", "Not Found"); > acc_db_request("404 missed call", "missed_calls"); > > }; > } > > >