Re: [SR-Users] nathelper without usrloc

On Tue, Mar 31, 2020 at 11:12:23PM +0000, Daniel W. Graham wrote: It does but doesn't work as well as kamailio, and since the proxy is the entry point. The biggest issue here isnt the keepalive, as I did have that working. The main issue is the routing of messages, utilizing set_contact_alias and handle_ruri_alias, as Ive been unable to get ack and bye messages to make it past the proxy. I’m assuming these functions are not being used at the right locations or I need to rely on another mechanism to accomplish it. I also question my use of the PBX flag and the natmanage logic. -dan On Mar 31, 2020, at 7:01 PM, Sergiu Pojoga <pojogas@gmail.com<mailto:pojogas@gmail.com>> wrote: Hi Daniel, From what you are describing, my understanding is that the Registrar is the PBX, kamailio is acting as an edge proxy. If so, doesn't the PBX/registrar have NAT traversal/keepalive mechanisms of its own? Regards, --Sergiu On Tue, Mar 31, 2020 at 1:55 PM Daniel W. Graham <dan@cmsinter.net<mailto:dan@cmsinter.net><mailto:dan@cmsinter.net<mailto:dan@cmsinter.net>>> wrote: I’ve been missing with this for a while and seem to be missing something. Any suggestions on what is missing here? Trying to use set_contact_alias() and handle_ruri_alias() from nathelper module and nat_keepalive from nat_traversal module, without registrar. I had register keepalive working, that has since broke. When register keepalive was working, I was able to place call in either direction but ACK and BYE was not being routed past kamailio. Registrations are forwarded to the PBX using add_path() and is working. Also not included below is the routing to the PBX, that is just setting $du and t_relay, and is also working. Topology is: UA1 -> NAT -> kamailio -> PBX -> UA2 Using default config file as the example, modified with above changes. I also removed RTP config as that is a non-issue. request_route { …… # FLAG MESSAGES FROM PBX setflag(FLT_PBX); route(NATDETECT); …… route[NATDETECT] { if (nat_uac_test("19")) { force_rport(); set_contact_alias(); nat_keepalive(); } return; } route[WITHINDLG] { if (!has_totag()) return; if (loose_route()) { route(DLGURI); } else if ( is_method("ACK") ) { route(NATMANAGE); } else if ( is_method("NOTIFY") ) { record_route(); } route(RELAY); exit; } if (is_method("SUBSCRIBE") && uri == myself) { route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { route(RELAY); exit; } else { exit; } } sl_send_reply("404","Not here"); exit; } route[NATMANAGE] { if(isflagset(FLT_PBX)) { handle_ruri_alias(); } if(!isflagset(FLT_PBX)) { set_contact_alias(); } return; } route[DLGURI] { if(!isdsturiset()) { handle_ruri_alias(); } return; } branch_route[MANAGE_BRANCH] { route(NATMANAGE); } onreply_route[MANAGE_REPLY] { if(status=~"[12][0-9][0-9]") { route(NATMANAGE); } } failure_route[MANAGE_FAILURE] { route(NATMANAGE); if (t_is_canceled()) exit; -dan _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users