[Serusers] voice mail doesn't stop redording and never sends voicemail - need help
Hi all, I have been trying to solve this problem for a couple of hours, but i could'n. Could somebody help me? I have configure a voice mail system (http://iptel.org/~faqomatic/fom-serve/cache/92.html) and I have a problem when it answer the call; it doesn't stop recording when I hang on the phone and never sends the mail. this is the sems debug: ------------------------------------------------------------------------------------------------------------------------------------------------ (815) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/2870083197@200.69.228.52.wav) (815) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (815) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:0000032F15FB7483 BYE sip:100@200.69.228.52:5060;user=phone;transport=udp sip:200@200.69.228.49;ftag=450631392;lr=on From: <sip:200@200.69.228.49;user=phone>;tag=0000032F41C67EA6 To: <sip:100@200.69.228.49;user=phone>;tag=450631392 CSeq: 2 BYE Call-ID: 2870083197@200.69.228.52 Contact: <sip:200@200.69.228.49:5090> Route: <sip:200@200.69.228.49;ftag=450631392;lr=on> . .
(815) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed --------------------------------------------------------------------------------------------------- it never never gets the: DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded and sends the mail. When I call the voice mail with an ATA pointing to port 5090 (SER voice mail) it works ok and sends the mail. The system is configured with 2 SER, one for routing and the other for voice mail. Find attached the configuration files. Thank you in advance Juan Priotti
Have you seen the BYE on the net? And a reply to it? -jiri At 10:38 PM 2/23/2004, Juan wrote:
Hi all, I have been trying to solve this problem for a couple of hours, but i could'n. Could somebody help me? I have configure a voice mail system (<http://iptel.org/~faqomatic/fom-serve/cache/92.html>http://iptel.org/~faqomatic/fom-serve/cache/92.html) and I have a problem when it answer the call; it doesn't stop recording when I hang on the phone and never sends the mail. this is the sems debug: ------------------------------------------------------------------------------------------------------------------------------------------------ (815) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/2870083197@200.69.228.52.wav) (815) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (815) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:0000032F15FB7483 BYE sip:100@200.69.228.52:5060;user=phone;transport=udp sip:200@200.69.228.49;ftag=450631392;lr=on From: <sip:200@200.69.228.49;user=phone>;tag=0000032F41C67EA6 To: <sip:100@200.69.228.49;user=phone>;tag=450631392 CSeq: 2 BYE Call-ID: <mailto:2870083197@200.69.228.52>2870083197@200.69.228.52 Contact: <sip:200@200.69.228.49:5090> Route: <sip:200@200.69.228.49;ftag=450631392;lr=on> . .
(815) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed ---------------------------------------------------------------------------------------------------
it never never gets the:
DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded
and sends the mail. When I call the voice mail with an ATA pointing to port 5090 (SER voice mail) it works ok and sends the mail. The system is configured with 2 SER, one for routing and the other for voice mail. Find attached the configuration files. Thank you in advance
Juan Priotti
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Jiri Kuthan http://iptel.org/~jiri/
I can see the bye and the reply to it. This is what I see on the net: # U 200.69.228.52:5060 -> 200.69.228.49:5060 INVITE sip:200@200.69.228.49;user=phone SIP/2.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=phone> ;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>..Call-ID: 3273316177@200.69.228.52..CSeq: 1 INVITE..Contact: <sip:100 @200.69.228.52:5060;user=phone;transport=udp>..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Expires: 300..Content-Length: 248 ..Content-Type: application/sdp....v=0..o=100 13453 13453 IN IP4 200.69.228.52..s=ATA186 Call..c=IN IP4 200.69.228.52..t=0 0..m =audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0 PCMU/8000/1..a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101 telephone- event/8000..a=fmtp:101 0-15.. # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=pho ne>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>..Call-ID: 3273316177@200.69.228.52..CSeq: 1 INVITE..Server: Sip EXp ress router (0.8.12 (i386/freebsd))..Content-Length: 0..Warning: 392 200.69.228.49:5060 "Noisy feedback tells: pid=921 req_src _ip=200.69.228.52 req_src_port=5060 in_uri=sip:200@200.69.228.49;user=phone out_uri=sip:200@200.69.228.39:5060;user=phone;trans port=udp via_cnt==1".... # U 200.69.228.49:5060 -> 200.69.228.39:5060 INVITE sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag =3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKe8cb.d06324d3.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: < sip:100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>..Call-ID: 3273316177@200.69.228.52..C Seq: 1 INVITE..Contact: <sip:100@200.69.228.52:5060;user=phone;transport=udp>..User-Agent: Cisco ATA v2.15 ata18x (020927a).. Expires: 300..Content-Length: 248..Content-Type: application/sdp....v=0..o=100 13453 13453 IN IP4 200.69.228.52..s=ATA186 Call. .c=IN IP4 200.69.228.52..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0 PCMU/8000/1..a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCM A/8000/1..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15.. # U 200.69.228.39:5060 -> 200.69.228.49:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKe8cb.d06324d3.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: < sip:100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=2822163365..Call-ID: 3273316177@2 00.69.228.52..CSeq: 1 INVITE..Server: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.39:5060 -> 200.69.228.49:5060 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKe8cb.d06324d3.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=2822163365..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Server: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:2 00@200.69.228.49;user=phone>;tag=2822163365..Call-ID: 3273316177@200.69.228.52..CSeq: 1 INVITE..Server: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 CANCEL sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKe8cb.d06324d3. 0..From: <sip:100@200.69.228.49;user=phone>;tag=3788800848..Call-ID: 3273316177@200.69.228.52..To: <sip:200@200.69.228.49;use r=phone>..CSeq: 1 CANCEL..User-Agent: Sip EXpress router(0.8.12 (i386/freebsd))..Content-Length: 0.... # U 200.69.228.39:5060 -> 200.69.228.49:5060 SIP/2.0 200 OK..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKe8cb.d06324d3.0..From: <sip:100@200.69.228.49;user=phone>;tag=378 8800848..To: <sip:200@200.69.228.49;user=phone>;tag=2822163365..Call-ID: 3273316177@200.69.228.52..CSeq: 1 CANCEL..Server: Cis co ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.39:5060 -> 200.69.228.49:5060 SIP/2.0 487 Request Cancelled..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKe8cb.d06324d3.0..Via: SIP/2.0/UDP 200.69.228.52:506 0..From: <sip:100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=2822163365..Call-ID: 3 273316177@200.69.228.52..CSeq: 1 INVITE..Server: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKe8cb.d06324d3.0.. From: <sip:100@200.69.228.49;user=phone>;tag=3788800848..Call-ID: 3273316177@200.69.228.52..To: <sip:200@200.69.228.49;user=p hone>;tag=2822163365..CSeq: 1 ACK..User-Agent: Sip EXpress router(0.8.12 (i386/freebsd))..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 180 ringing..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: < sip:100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 327331 6177@200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Server: Sip EXpress router (0.8.12 (i386/freebsd)).. Content-Length: 0..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.69.228.49 req_src_port=5060 i n_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt==0".... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49 SIP/2.0..Route: <sip:200@200.69.228.49:5090>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@20 0.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.6 9.228.52..CSeq: 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Route: <sip:200@200.69.228.49:5090>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Route: <sip:200@200.69.228.49:5090>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Route: <sip:200@200.69.228.49:5090>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Route: <sip:200@200.69.228.49:5090>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Route: <sip:200@200.69.228.49:5090>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.52:5060 -> 200.69.228.49:5060 BYE sip:200@200.69.228.49 SIP/2.0..Route: <sip:200@200.69.228.49:5090>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@20 0.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.6 9.228.52..CSeq: 2 BYE..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 BYE sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKb8cb.6304f3c2.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip :100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 327331617 7@200.69.228.52..CSeq: 2 BYE..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.39:5060 -> 200.69.228.49:5060 SIP/2.0 200 OK..Via: SIP/2.0/UDP 200.69.228.49;branch=z9hG4bKb8cb.6304f3c2.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip: 100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177 @200.69.228.52..CSeq: 2 BYE..Server: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@20 0.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq: 2 BYE..Server: Cisco ATA v2.15 ata18x ( 020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=phone>;tag=3788 800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq: 1 ACK..User-Agen t: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=phone>;tag=3788 800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq: 1 ACK..User-Agen t: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.52:5060 SIP/2.0 200 OK..Record-Route: <sip:200@200.69.228.49;ftag=3788800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:1 00@200.69.228.49;user=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@ 200.69.228.52..CSeq: 1 INVITE..Contact: <sip:200@200.69.228.49:5090>..Content-Type: application/sdp..Server: Sip EXpress router (0.8.12 (i386/freebsd))..Content-Length: 131..Warning: 392 200.69.228.49:5090 "Noisy feedback tells: pid=956 req_src_ip=200.6 9.228.49 req_src_port=5060 in_uri=sip:200@200.69.228.49:5090;user=phone out_uri=sip:200@200.69.228.49:5090;user=phone via_cnt== 0"....v=0..o=username 0 0 IN IP4 200.69.228.49..s=session..c=IN IP4 200.69.228.49..t=0 0..m=audio 58516 RTP/AVP 0..a=rtpmap:0 P CMU/8000.. # U 200.69.228.52:5060 -> 200.69.228.49:5060 ACK sip:200@200.69.228.49:5060 SIP/2.0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;user=phone>;tag=3788 800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq: 1 ACK..User-Agen t: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... # U 200.69.228.49:5060 -> 200.69.228.39:5060 ACK sip:200@200.69.228.39:5060;user=phone;transport=udp SIP/2.0..Max-Forwards: 10..Record-Route: <sip:200@200.69.228.49;ftag=37 88800848;lr=on>..Via: SIP/2.0/UDP 200.69.228.49;branch=0..Via: SIP/2.0/UDP 200.69.228.52:5060..From: <sip:100@200.69.228.49;us er=phone>;tag=3788800848..To: <sip:200@200.69.228.49;user=phone>;tag=000003C941C67EA6..Call-ID: 3273316177@200.69.228.52..CSeq : 1 ACK..User-Agent: Cisco ATA v2.15 ata18x (020927a)..Content-Length: 0.... ^Cexit 10857 received, 0 dropped Thank you Juan ----- Original Message ----- From: "Jiri Kuthan" <jiri@iptel.org> To: "Juan" <juan@korreo.com.ar>; <serusers@lists.iptel.org> Sent: Monday, February 23, 2004 7:06 PM Subject: Re: [Serusers] voice mail doesn't stop redording and never sends voicemail - need help
Have you seen the BYE on the net? And a reply to it? -jiri
At 10:38 PM 2/23/2004, Juan wrote:
Hi all, I have been trying to solve this problem for a couple of hours, but i could'n. Could somebody help me? I have configure a voice mail system (<http://iptel.org/~faqomatic/fom-serve/cache/92.html>http://iptel.org/~faqo matic/fom-serve/cache/92.html) and I have a problem when it answer the call; it doesn't stop recording when I hang on the phone and never sends the mail. this is the sems debug:
---------------------------------------------------------------------------
(815) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/2870083197@200.69.228.52.wav) (815) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (815) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:0000032F15FB7483 BYE sip:100@200.69.228.52:5060;user=phone;transport=udp sip:200@200.69.228.49;ftag=450631392;lr=on From: <sip:200@200.69.228.49;user=phone>;tag=0000032F41C67EA6 To: <sip:100@200.69.228.49;user=phone>;tag=450631392 CSeq: 2 BYE Call-ID: <mailto:2870083197@200.69.228.52>2870083197@200.69.228.52 Contact: <sip:200@200.69.228.49:5090> Route: <sip:200@200.69.228.49;ftag=450631392;lr=on> . .
(815) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed
---------------------------------------------------------------------------
it never never gets the:
DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200
fifo_t_reply succeeded
and sends the mail. When I call the voice mail with an ATA pointing to
port 5090 (SER voice mail) it works ok and sends the mail.
The system is configured with 2 SER, one for routing and the other for voice mail. Find attached the configuration files. Thank you in advance
Juan Priotti
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Jiri Kuthan http://iptel.org/~jiri/
Hi Juan, could you send us again your config files (the files in the current mail empty...). Further, it would be interesting to look at Ser's log file. If there are any routing problems, Ser's timer should hit and send an error back to Sems. Sems has also a timer, but much too long for that (about 5 minutes...). -Raphael. ----- Original Message ----- From: "Juan" <juan@korreo.com.ar> To: <serusers@lists.iptel.org> Sent: Monday, February 23, 2004 10:38 PM Subject: [Serusers] voice mail doesn't stop redording and never sendsvoicemail - need help Hi all, I have been trying to solve this problem for a couple of hours, but i could'n. Could somebody help me? I have configure a voice mail system (http://iptel.org/~faqomatic/fom-serve/cache/92.html) and I have a problem when it answer the call; it doesn't stop recording when I hang on the phone and never sends the mail. this is the sems debug: ---------------------------------------------------------------------------- -------------------------------------------------------------------- (815) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/2870083197@200.69.228.52.wav) (815) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (815) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:0000032F15FB7483 BYE sip:100@200.69.228.52:5060;user=phone;transport=udp sip:200@200.69.228.49;ftag=450631392;lr=on From: <sip:200@200.69.228.49;user=phone>;tag=0000032F41C67EA6 To: <sip:100@200.69.228.49;user=phone>;tag=450631392 CSeq: 2 BYE Call-ID: 2870083197@200.69.228.52 Contact: <sip:200@200.69.228.49:5090> Route: <sip:200@200.69.228.49;ftag=450631392;lr=on> . .
(815) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed ---------------------------------------------------------------------------- ----------------------- it never never gets the: DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded and sends the mail. When I call the voice mail with an ATA pointing to port 5090 (SER voice mail) it works ok and sends the mail. The system is configured with 2 SER, one for routing and the other for voice mail. Find attached the configuration files. Thank you in advance Juan Priotti ---------------------------------------------------------------------------- ----
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi Raphael, I'm attaching the config files and sems debug log. I'm sending you the ser's log file in some minutes. Thank you Juan ----- Original Message ----- From: "Raphael Coeffic" <rco@iptel.org> To: "Juan" <juan@korreo.com.ar>; <serusers@lists.iptel.org> Sent: Monday, February 23, 2004 7:12 PM Subject: Re: [Serusers] voice mail doesn't stop redording and never sendsvoicemail - need help
Hi Juan,
could you send us again your config files (the files in the current mail empty...). Further, it would be interesting to look at Ser's log file. If there are any routing problems, Ser's timer should hit and send an error back to Sems. Sems has also a timer, but much too long for that (about 5 minutes...).
-Raphael.
----- Original Message ----- From: "Juan" <juan@korreo.com.ar> To: <serusers@lists.iptel.org> Sent: Monday, February 23, 2004 10:38 PM Subject: [Serusers] voice mail doesn't stop redording and never sendsvoicemail - need help
Hi all, I have been trying to solve this problem for a couple of hours, but i could'n. Could somebody help me? I have configure a voice mail system (http://iptel.org/~faqomatic/fom-serve/cache/92.html) and I have a problem when it answer the call; it doesn't stop recording when I hang on the phone and never sends the mail. this is the sems debug: -------------------------------------------------------------------------- -- -------------------------------------------------------------------- (815) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/2870083197@200.69.228.52.wav) (815) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (815) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:0000032F15FB7483 BYE sip:100@200.69.228.52:5060;user=phone;transport=udp sip:200@200.69.228.49;ftag=450631392;lr=on From: <sip:200@200.69.228.49;user=phone>;tag=0000032F41C67EA6 To: <sip:100@200.69.228.49;user=phone>;tag=450631392 CSeq: 2 BYE Call-ID: 2870083197@200.69.228.52 Contact: <sip:200@200.69.228.49:5090> Route: <sip:200@200.69.228.49;ftag=450631392;lr=on> . .
(815) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed
-------------------------------------------------------------------------- -- -----------------------
it never never gets the:
DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded
and sends the mail. When I call the voice mail with an ATA pointing to port 5090 (SER voice mail) it works ok and sends the mail. The system is configured with 2 SER, one for routing and the other for voice mail. Find attached the configuration files. Thank you in advance
Juan Priotti
-------------------------------------------------------------------------- -- ----
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Raphael, Please find attached the ser log file. Thanks Juan ----- Original Message ----- From: "Raphael Coeffic" <rco@iptel.org> To: "Juan" <juan@korreo.com.ar>; <serusers@lists.iptel.org> Sent: Monday, February 23, 2004 7:12 PM Subject: Re: [Serusers] voice mail doesn't stop redording and never sendsvoicemail - need help
Hi Juan,
could you send us again your config files (the files in the current mail empty...). Further, it would be interesting to look at Ser's log file. If there are any routing problems, Ser's timer should hit and send an error back to Sems. Sems has also a timer, but much too long for that (about 5 minutes...).
-Raphael.
----- Original Message ----- From: "Juan" <juan@korreo.com.ar> To: <serusers@lists.iptel.org> Sent: Monday, February 23, 2004 10:38 PM Subject: [Serusers] voice mail doesn't stop redording and never sendsvoicemail - need help
Hi all, I have been trying to solve this problem for a couple of hours, but i could'n. Could somebody help me? I have configure a voice mail system (http://iptel.org/~faqomatic/fom-serve/cache/92.html) and I have a problem when it answer the call; it doesn't stop recording when I hang on the phone and never sends the mail. this is the sems debug: -------------------------------------------------------------------------- -- -------------------------------------------------------------------- (815) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/2870083197@200.69.228.52.wav) (815) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (815) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:0000032F15FB7483 BYE sip:100@200.69.228.52:5060;user=phone;transport=udp sip:200@200.69.228.49;ftag=450631392;lr=on From: <sip:200@200.69.228.49;user=phone>;tag=0000032F41C67EA6 To: <sip:100@200.69.228.49;user=phone>;tag=450631392 CSeq: 2 BYE Call-ID: 2870083197@200.69.228.52 Contact: <sip:200@200.69.228.49:5090> Route: <sip:200@200.69.228.49;ftag=450631392;lr=on> . .
(815) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed
-------------------------------------------------------------------------- -- -----------------------
it never never gets the:
DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded
and sends the mail. When I call the voice mail with an ATA pointing to port 5090 (SER voice mail) it works ok and sends the mail. The system is configured with 2 SER, one for routing and the other for voice mail. Find attached the configuration files. Thank you in advance
Juan Priotti
-------------------------------------------------------------------------- -- ----
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
participants (3)
-
Jiri Kuthan -
Juan -
Raphael Coeffic