Hi All --------------------------------- These is my configuration file --------------------------------- # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #Uncomment these lines to enter debugging mode debug=8 fork=yes log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") #modparam("auth_radius", "service_type", 15) # ------------------------- request routing logic ------------------- route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; } ; # authenticate register message using radius if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("","0"); break; }; save("location"); break; }; # route (proxy) invite message to gateway # if (method=="INVITE") || (method=="CANCEL") { # Uncomment this if you want to use digest authentication # if (!radius_www_authorize("")) { # www_challenge("", "0"); # break; # }; if (method=="INVITE") || (method=="CANCEL") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("","0"); break; }; record_route(); rewritehostport("cisco_sip_gw_ip:5060"); if (!t_relay()) { sl_reply_error(); }; break; }; } -------------------------------------------- When it is running it showes the this result -------------------------------------------- 0(14249) DEBUG: init_mod: auth 0(14249) auth module - initializing 0(14249) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(14249) DEBUG: init_mod: auth_radius 0(14249) auth_radius - Initializing Upto this it shows after this it does not says SER is ready when i run ./serctl moni [cycle #: 1; if constant make sure server lives and fifo is on] SER is not showing server is ready please tell me Thank u Silatha __________________________________ Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. http://info.mail.yahoo.com/mail_250