Hi All,
I installed SER 0.9.4 and I was able to make and receive calls. SER and Mysql run on the same unix box which is located at some other place and which also runs a webserver. After starting ser everything goes fine but after sometime the whole system goes down and I was not even able to connect to unix box using SSH or to any web page of that webserver. Does the Number of connections made by SER to Mysql is causing the problem or is there anything wrong with my SER configuration and Mysql? If Number of connections is the problem then please tell me what must I do to reduce the number of connections to Mysql from SER.
Also please tell me if there is any new Mysql.so module or any other module which fixes this.
Thanks, Manoj
Hi Manoj,
I might be wrong, but this does NOT sound like a problem cuased by Ser and Mysql.
I would advice you to check the system logs, and check if there is some logical reason there.
- Atle
* mkumar@mantragroup.com mkumar@mantragroup.com [060207 11:24]:
Hi All,
I installed SER 0.9.4 and I was able to make and receive calls. SER and Mysql run on the same unix box which is located at some other place and which also runs a webserver. After starting ser everything goes fine but after sometime the whole system goes down and I was not even able to connect to unix box using SSH or to any web page of that webserver. Does the Number of connections made by SER to Mysql is causing the problem or is there anything wrong with my SER configuration and Mysql? If Number of connections is the problem then please tell me what must I do to reduce the number of connections to Mysql from SER.
Also please tell me if there is any new Mysql.so module or any other module which fixes this.
Thanks, Manoj
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi,
I checked my logs and I did not find any proper reason for my crash. Actually only after installing SER my webserver started crashing and this is the third time in this week. If I did not start SER, things are fine. So please tell me how can I reduce connections to Mysql from SER?
I find one post in mailing asking to change config.c in postgres.so but I did not load that module in ser.cfg itself.
Any help will be sincerely appreciated.
Thanks, Manoj
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi Manoj,
I might be wrong, but this does NOT sound like a problem cuased by Ser and Mysql.
I would advice you to check the system logs, and check if there is some logical reason there.
- Atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 11:24]:
Hi All,
I installed SER 0.9.4 and I was able to make and receive calls. SER and Mysql run on the same unix box which is located at some other place and which also runs a webserver. After starting ser everything goes fine but after sometime the whole system goes down and I was not even able to connect to unix box using SSH or to any web page of that webserver. Does the Number of connections made by SER to Mysql is causing the problem or is there anything wrong with my SER configuration and Mysql? If Number of connections is the problem then please tell me what must I do to reduce the number of connections to Mysql from SER.
Also please tell me if there is any new Mysql.so module or any other module which fixes this.
Thanks, Manoj
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi again,
You can reduce the mysql connections with reducing how many children you are running by useing the children=something variable.
But I personally doubt that this will solve your problem. and, if it does then you must be aware that if somebody connectes a few times to your webserver, your server might as well go down.
-atle
* mkumar@mantragroup.com mkumar@mantragroup.com [060207 14:52]:
Hi,
I checked my logs and I did not find any proper reason for my crash. Actually only after installing SER my webserver started crashing and this is the third time in this week. If I did not start SER, things are fine. So please tell me how can I reduce connections to Mysql from SER?
I find one post in mailing asking to change config.c in postgres.so but I did not load that module in ser.cfg itself.
Any help will be sincerely appreciated.
Thanks, Manoj
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi Manoj,
I might be wrong, but this does NOT sound like a problem cuased by Ser and Mysql.
I would advice you to check the system logs, and check if there is some logical reason there.
- Atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 11:24]:
Hi All,
I installed SER 0.9.4 and I was able to make and receive calls. SER and Mysql run on the same unix box which is located at some other place and which also runs a webserver. After starting ser everything goes fine but after sometime the whole system goes down and I was not even able to connect to unix box using SSH or to any web page of that webserver. Does the Number of connections made by SER to Mysql is causing the problem or is there anything wrong with my SER configuration and Mysql? If Number of connections is the problem then please tell me what must I do to reduce the number of connections to Mysql from SER.
Also please tell me if there is any new Mysql.so module or any other module which fixes this.
Thanks, Manoj
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi Atle,
Thanks for the reply.
Currently in ser.cfg I gave children count as 4 only and I think it should be ok.
Someone please help me to solve my problem.
Thanks, Manoj.
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi again,
You can reduce the mysql connections with reducing how many children you are running by useing the children=something variable.
But I personally doubt that this will solve your problem. and, if it does then you must be aware that if somebody connectes a few times to your webserver, your server might as well go down.
-atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 14:52]:
Hi,
I checked my logs and I did not find any proper reason for my crash. Actually only after installing SER my webserver started crashing and this is the third time in this week. If I did not start SER, things are fine. So please tell me how can I reduce connections to Mysql from SER?
I find one post in mailing asking to change config.c in postgres.so but I did not load that module in ser.cfg itself.
Any help will be sincerely appreciated.
Thanks, Manoj
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi Manoj,
I might be wrong, but this does NOT sound like a problem cuased by Ser and Mysql.
I would advice you to check the system logs, and check if there is some logical reason there.
- Atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 11:24]:
Hi All,
I installed SER 0.9.4 and I was able to make and receive calls.
SER and Mysql
run on the same unix box which is located at some other place and
which also
runs a webserver. After starting ser everything goes fine but
after sometime
the whole system goes down and I was not even able to connect to
unix box using
SSH or to any web page of that webserver. Does the Number of
connections made
by SER to Mysql is causing the problem or is there anything wrong
with my SER
configuration and Mysql? If Number of connections is the problem
then please
tell me what must I do to reduce the number of connections to
Mysql from SER.
Also please tell me if there is any new Mysql.so module or any
other module
which fixes this.
Thanks, Manoj
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi Again,
as I said, I think this issue must be something else then SER related. how does the machine crash ? what is the error message?
-a
* mkumar@mantragroup.com mkumar@mantragroup.com [060207 15:48]:
Hi Atle,
Thanks for the reply.
Currently in ser.cfg I gave children count as 4 only and I think it should be ok.
Someone please help me to solve my problem.
Thanks, Manoj.
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi again,
You can reduce the mysql connections with reducing how many children you are running by useing the children=something variable.
But I personally doubt that this will solve your problem. and, if it does then you must be aware that if somebody connectes a few times to your webserver, your server might as well go down.
-atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 14:52]:
Hi,
I checked my logs and I did not find any proper reason for my crash. Actually only after installing SER my webserver started crashing and this is the third time in this week. If I did not start SER, things are fine. So please tell me how can I reduce connections to Mysql from SER?
I find one post in mailing asking to change config.c in postgres.so but I did not load that module in ser.cfg itself.
Any help will be sincerely appreciated.
Thanks, Manoj
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi Manoj,
I might be wrong, but this does NOT sound like a problem cuased by Ser and Mysql.
I would advice you to check the system logs, and check if there is some logical reason there.
- Atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 11:24]:
Hi All,
I installed SER 0.9.4 and I was able to make and receive calls. SER and Mysql run on the same unix box which is located at some other place and which also runs a webserver. After starting ser everything goes fine but after sometime the whole system goes down and I was not even able to connect to unix box using SSH or to any web page of that webserver. Does the Number of connections made by SER to Mysql is causing the problem or is there anything wrong with my SER configuration and Mysql? If Number of connections is the problem then please tell me what must I do to reduce the number of connections to Mysql from SER.
Also please tell me if there is any new Mysql.so module or any other module which fixes this.
Thanks, Manoj
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
You might also try to add
set-variable = max_connections=500
In the config file of your mysql server.
Samuel.
2006/2/7, Atle Samuelsen clona@cyberhouse.no:
Hi Again,
as I said, I think this issue must be something else then SER related. how does the machine crash ? what is the error message?
-a
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 15:48]:
Hi Atle,
Thanks for the reply.
Currently in ser.cfg I gave children count as 4 only and I think it should be ok.
Someone please help me to solve my problem.
Thanks, Manoj.
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi again,
You can reduce the mysql connections with reducing how many children you are running by useing the children=something variable.
But I personally doubt that this will solve your problem. and, if it does then you must be aware that if somebody connectes a few times to your webserver, your server might as well go down.
-atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 14:52]:
Hi,
I checked my logs and I did not find any proper reason for my crash. Actually only after installing SER my webserver started crashing and this is the third time in this week. If I did not start SER, things are fine. So please tell me how can I reduce connections to Mysql from SER?
I find one post in mailing asking to change config.c in postgres.so but I did not load that module in ser.cfg itself.
Any help will be sincerely appreciated.
Thanks, Manoj
Quoting Atle Samuelsen clona@cyberhouse.no:
Hi Manoj,
I might be wrong, but this does NOT sound like a problem cuased by Ser and Mysql.
I would advice you to check the system logs, and check if there is some logical reason there.
- Atle
- mkumar@mantragroup.com mkumar@mantragroup.com [060207 11:24]:
Hi All,
I installed SER 0.9.4 and I was able to make and receive calls. SER and Mysql run on the same unix box which is located at some other place and which also runs a webserver. After starting ser everything goes fine but after sometime the whole system goes down and I was not even able to connect to unix box using SSH or to any web page of that webserver. Does the Number of connections made by SER to Mysql is causing the problem or is there anything wrong with my SER configuration and Mysql? If Number of connections is the problem then please tell me what must I do to reduce the number of connections to Mysql from SER.
Also please tell me if there is any new Mysql.so module or any other module which fixes this.
Thanks, Manoj
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Atle Samuelsen -
mkumar＠mantragroup.com -
samuel